3Com 3C16464A Технічний паспорт - Сторінка 4
Переглянути онлайн або завантажити pdf Технічний паспорт для Перемикач 3Com 3C16464A. 3Com 3C16464A 12 сторінок. Superstack ii baseline hubs and switches
Друкувати сторінку
SuperStack II Baseline Hubs
The 3Com SuperStack II Baseline
hubs provide high-quality connectivity
solutions at entry-level prices for shared
Ethernet networks that don't require
comprehensive management. These
hubs are ideal for low-intensity network
environments such as general office
applications using small networked files.
With the lowest per-port cost in the
SuperStack II range, the Baseline hubs
offer exceptional value for money, and
provide the most cost-effective way to
add new users to a network.
The SuperStack II Baseline Hubs
provide 12- or 24-10BASE-T RJ-45
ports, allowing each hub to connect
either 12 or 24 users. Each hub has an
MDI/MDIX switch, which connects
multiple hubs—expanding the network
using normal UTP cabling. The
Baseline hubs provide a transceiver
interface slot, allowing connection to
alternative network media, such as
fiber or coax. Optional transceiver
interface modules are available from
3Com.
12 or 24 RJ-45 10BASE-T
connections
MDI/MDIX switchable port
allows for simple cascading of hubs
without the need for special
crossover cable.
Slot for optional transceiver inter-
face module provides a connection
to legacy networking devices or
fiber.
19" size for easy installation in a
wiring closet. A rackmounting kit
is supplied. The product can also
be used free-standing.
Transceiver Interface Modules
The 12- and 24-port Baseline Hubs
are equipped with a slot ready to
accommodate one of 3Com's slide-in
transceiver interface modules.
Here are some ways to use them:
1. They allow you to connect to legacy
equipment via 10BASE2 (coaxial)
cable or AUI cable. The following
transceiver interface modules can
be used for this:
4
SuperStack II Baseline Hubs
Front View
12 or 24 ports (RJ-45)
Back View
Advanced RPS
connector
(Burndy type)
Diagnostic LEDs indicate network
traffic, port status, and collisions,
making it easy to spot-check faults
and check individual port status.
3Com lifetime limited warranty
Connection for the SuperStack II
Advanced Redundant Power
System provides ultimate protec-
tion against network downtime.
The SuperStack II Advanced
Redundant Power System
and Uninterruptible Power System
are available as options from 3Com.
Coaxial Module BNC connector
(3C1206-6) – Provides direct
connection to a 10BASE2 (coaxial)
network via a BNC connector.
AUI Module female AUI connector
(3C1206-0) – Provides connection
to an external transceiver via an
AUI connector.
Fan-Out Module male AUI connector
(3C1206-4) – Provides direct connec-
tion to a PC, server, or network
device via an AUI cable.
Port
MDI/MDIX
status
switch
LEDs
Slot for transceiver
interface module
2. They can give you a direct interface
from your Baseline Hub to a 10 Mbps
fiber link (for example, a campus
backbone connection). The following
variants are available:
10BASE-FL Module with ST fiber
connector (3C1206-5)
10BASE-FB Module with ST fiber
connector (3C12067)
3. They can provide you with an
additional 10BASE-T port.
UTP Module with RJ45 connector
(3C12063)
Power,
network traffic,
collision LEDs