DiamondBoxx PASUB15 Посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник для Спікери DiamondBoxx PASUB15. DiamondBoxx PASUB15 10 сторінок.

6. GAIN - This is to control the volume level of the subwoofer relative to the

main speakers. Adjust up or down to taste. Note if too high and excessive

distortion is heard lower this control or the bass control on the main.

Excessive distortion will drain the battery.

7. FULL - This LED will illuminate when charging is complete

8. CHARGE - This LED will illuminate when battery is charging

9. LOW - This LED will illuminate when the speaker is powered on and battery

is low

10. DC INPUT - This can be used to connect to another battery for extended

playtime or to a DC charger. Do not apply more than 14.4 Volts DC to this

connection. If these terminals are accidentally shorted fuse #11 will blow

11. DC INPUT FUSE - This is a 25A fuse made to protect the DC input jack #10

from user error. This fuse is between the DC input jack and the battery

electrically

12. BATTERY FUSE - This is a 25A fuse made to protect the internal battery

from the amplifier. This fuse is between the internal battery and the

internal amplifier

13. POWER - This is the main power switch, is does not need to be turned off

to charge the battery.

14. AC INPUT - This is the receptacle for the AC mains power. The power

supply in the PASUB15 can accept universal mains voltage from 100V-240V

and 50-60Hz, this covers most countries electrical grids