DiamondCore Tools CINK Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Система водопостачання DiamondCore Tools CINK. DiamondCore Tools CINK 14 сторінок. Self-contained system for cleanup of clay, clay water, pottery tools and accessories
Також для DiamondCore Tools CINK: Посібник користувача (14 сторінок)

Друкувати сторінку

MAINTENANCE

Winterizing The CINK (Cold Weather or Freezing Conditions)

CAUTION: The CINK is NOT designed to operate or be stored with water or clay in it during freezing conditions.

If freezing conditions are anticipated, remove all water and clay from the entire system. The manufacturer is not

responsible for any damage to the system, caused by the user, due to cold weather or freezing conditions.

Unplug the unit and empty

and clean both buckets and

the string filter housing.

DO NOT REPLACE ANY WATER.

Note: After the system has had a chance to dry, be sure to plug the hose fittings back into the pump and press the

blue or black lock tabs on the pump back down all the way.

Extended Non-Use of The CINK

If you don't plan to use The CINK for an extended period, we recommend unplugging the unit, removing all water

and clay from the system, cleaning the unit and allowing the filters to air dry. Follow instructions for Winterizing The

CINK above.

Water Cleanliness

If you want to include an additive to the water to help prevent the water from smelling, you can add pool or spa

chlorine or oil. Additives are also good to help prevent bacteria in the water.

diamondcoretools.com | [email protected]

Drain pump by removing tabs

and pulling tubes from sockets.

2 seconds

With tubes removed, purge the

pump of any water by plugging in

the power cord for only 2 seconds,

THEN UNPLUG THE POWER CORD.