This model can play Dolby Digital, but only in two channels. This model does not have a DTS decoder, You must connect a unit with a Dolby Digital or
DTS decoder to enjoy surround sound.
~The equipment connections described are examples.
eperipheral equipment and optional cables said separately unless otherwise indicated.
c5efore connection, turn off all equipment and read the appropriate operating instructions
enjoy
stereo or
onnect a digital amplifier or
system component.
Change the settings in "Digital
You cannot use DTS Digital Surround
decoders not suited to DVD.
S~aak~ra (Example)
You can enjoy surround sound
by connecting three or more
Insert fully, with
this side facing up
1'
To eojoy stereo or DC3
Connect an analog amplifier or system component.
You can enjoy more powerful bass by connecting an active subwoofer.
@Place the subwoofer as close as possible to the front canter.
Turn BASS PLUS on to boost the
output
from the subwoofer (* page '13).
Adjust the volume on the subwoofer to suit your preference.
~~~~
t~~~e~
rBC0
reco
digital signal directly to digital recording equipment.
a cassette
deck or other recording
the recording equipment
with an optical digital audio cable
Connect the recording equipment with an audio cable (Q
ove).
There are no limitations on recording analog signals as the
digital signals.
DVD, the following conditions must be met: @ the disc doesn't have
protection preventing digital recording, and @ the recording equipment
can handle signals with a sampling frequency of 40 kWz.
~You cannot record DTS signals.
~YOU cannot record MP3/WMA.
When recording DVDs, make the following settings.
ADVANCED SURROUND: OFF (- page 12)
PCM Down Conversion: Yes (- page 17)
f DTS Digital Surround: Off (" page 17)
F
Ls