Diasonic DDR-6000 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Диктофон Diasonic DDR-6000. Diasonic DDR-6000 20 сторінок. Digital voice recorder & audio player fm radio

Друкувати сторінку

Basic Operation

Model

DDR-6000( 1G Mb) DDR-6000( 2G Mb)

Voice

SHQ : 4240 min

Recording

HQ : 8480 min

Time

SP : 16960 min

FM, LINE

SHQ : 1,060 min

Recording

HQ : 1,400 min

Time

SP : 2,120 min

Recording Monitoring

To listen to the recorded data, use the earphones.

Caution

When the folder is full, recording will not be made.

When the recording number exceeds over 256 in a folder, next

file will be recorded in to the next folder.

Total 2,048files can be stored to Voc_A-H, Line and FM folder

in Voice mode.

Voice Recording

With the voice recorder, the user can record conversations and

lectures. The recorded files are stored under Voice folder and the

file name format is MIC001_SHQ.MP3. By accessing the PC, the

user can check the files.

Select the DIR in the Voice menu, and

select the folder.(See the Menu Setup.)

Select R_QTY in the Voice menu and the

recording quality. (See the Menu Setup.)

Press the Recording button. For the first

five seconds after the recording starts,

the user cannot stop recording.

Note

- When the voice recorder is far away from the microphones or

sound is low, the recording quality is poor. Place the sound

microphones and the voice recorder close each other.

SHQ : 8480 min

HQ : 16960 min

SP : 33920 min

SHQ : 2,120 min

HQ : 2,800 min

SP : 4,240 min

Basic Operation

Recording Data from External Device

Record files from an external source is stored under Line folder,

and the file name format is Line001_SHQ.MP3. By accessing

the PC, the user can check the files.

Caution

To record sound, set the volume of the voice recorder at the

middle position. Do not change the volume during recording.

When the volume is set high, noise may occur.

Before accessing the voice recorder from an external device,

turn off both the voice recorder and the external device.

Before connecting an external device and the voice recorder,

read the manual of the device.

Recording from External Device

By connecting an external device through the Line-in cable, the

user can record sound sources from the cassette, MD, MP3

player, and the stereo set. Set the volume of the external

device properly before starting recording.

Connect the external microphones to

the Line-in port.

Change S_SEL in the Voice menu into

Line. (See the Menu Setup.)

Select R_QTY in the Voice menu and the

recording quality. (See the Menu

Setup.)

Press the Recording button.