Axis 01049-021 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Камера спостереження Axis 01049-021. Axis 01049-021 20 сторінок.

AXIS M2026-LE Mk II Network Camera

Additional settings

This section includes instructions about how to configure your device. If you want to learn more about how certain features

function, go to Learn more on page 11 .

Select exposure mode

There are different exposure mode options in the camera that adjusts aperture, shutter speed, and gain to improve image quality for

specific surveillance scenes. Go to Settings > Image > Exposure and select between the following exposure modes:

Reduce noise in low-light conditions

To reduce noise in low-light conditions, you can adjust one or more of the following settings:

•

Adjust the trade-off between noise and motion blur. Go to Settings > Image > Exposure and move the Blur-noise

trade-off slider toward Low noise.

Note

A high max shutter value can result in motion blur.

•

To slow down the shutter speed, set max shutter to the highest possible value.

•

Reduce sharpness in the image.

•

Open the aperture.

Maximize the details in an image

Important

If you maximize the details in an image, the bitrate will probably increase and you might get a reduced frame rate.

•

Make sure to select the capture mode that has the highest resolution.

•

Set the compression as low as possible.

•

Select MJPEG streaming.

•

Turn off Zipstream functionality.

This section includes instructions about how to configure your device. To learn more about how streaming and storage works, go to

Streaming and storage on page 11 .

Reduce bandwidth and storage

Important

If you reduce the bandwidth it can result in loss of details in the picture.

1. Go to live view and select H.264.

2. Go to Settings > Stream.

3. Do one or more of the following: