Easypack Shredder 084 Посібник з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Пакувальне обладнання Easypack Shredder 084. Easypack Shredder 084 14 сторінок. 1-phase machine
Друкувати сторінкуMaintenance
Always disconnect the shredder from the power supply before removing any covers.
Always disconnect the shredder from the power supply before removing any covers.
Always disconnect the shredder from the power supply before removing any covers.
Always disconnect the shredder from the power supply before removing any covers.
The machine is to be serviced or repaired only by suitably trained or qualified
personnel.
Every week lubricate the shredding wheels by
Every week
Every week
Every week
opening the outfeed doors and using a lubricating
spray e.g. WD40.
Every month remove the top cover and clear any
Every month
Every month
Every month
cardboard debris from above the shredding wheels.
Use the grease gun to inject grease into the four
grease nipples located on top of the machine - one or
two pumps is sufficient.
Every 6 months apply a lithium based grease (e.g.
Every 6 months
Every 6 months
Every 6 months
Castrol LM) to the drive gears.
For access to the mains fuse
access to the mains fuse remove the front panel.
access to the mains fuse
access to the mains fuse
Fuseholder containing 10 x 38mm 10A type aM fuse.
9