dibea D500 Pro Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пилосос dibea D500 Pro. dibea D500 Pro 9 сторінок. Robot vacuum cleaner
Друкувати сторінку
Product Operation
Host key display
S/N
Working state
1
Standby
Normal operation
2
Recharge
3
Recharge (when approaching)
4
Recharge (when aligning)
5
Charging
Yellow gradient
6
Charging complete
7
Fault
8
Use of water tank
The product is provided with water tank.
▲
Please do not use water tank on the carpet.
▲
During cleaning, please pay attention to fill water or clearance timely, and open the tank
plug during water filling.
▲
Please do not use water tank on the carpet.
▲
During initial use, the machine may work slowly when water comes out, but it is
normal. Please wet the mop cloth before mopping.
▲
When moving the machine, remove the water tank, and keep the machine horizontal.
▲
Please remove the water tank when the machine is not used, and discharge all water in
the tank.
1
Paste the mop cloth
Place the water tank upside down, sleeve
one end with a tiny pocket of the mop
cloth on the rectangular gear side of the
tank, and paste the mop cloth.
Color
Remarks
Yellow
Green
Yellow
Green
Blue
Green
Red
2
Add water
Open the tank plug, pick up enough water
with a small container, and inject water into
the water storage box slowly.
12
Product Operation
Install the water tank
3
Put the machine flat, push it along with the
machine bottom until it is buckled in place
(don't overturn the machine or lift it to buckle
tank, preventing water flowing into the
machine), and start the machine for mopping.
Remote control reservation setting
For facilitating cleaning, the product has the "Reservation" function. Time setting and reservation
setting shall work with the instruction to the host through remote control. After successful
reservation, the host will clean automatically every day according to the setting time.
▲
Before setting the current time and reservation time, ensure the START key is in "yellow" and
the host is in the wakeup state. If the host is not woken up, please press START key or the start/
stop key (
) of remote control to wake it up.
▲
The function is only for the non-APP configuration version, since APP configuration version
can be reserved by mobile phone directly.
Time setting
1
Long press clock key ( ) till the hour area on the remote control
screen flashes.
The size of numbers can be set by the key
be set through switching clock and minute by the key
After adjusting time, press clock key ( ) to save the current setting.
Fixed-time reservation
2
After pressing the reservation key (
), the hour area on the remote
control screen will flash.
The reservation time can be adjusted with the direction key (
After adjusting the reservation time, press reservation key (
save, and the host will clean automatically every day according to
the reservation time.
Cancel the reservation time
3
Adjust the reservation time of remote control display to "00:00" and
cancel the reservation.
When setting the current time and reservation time, all operations
will have prompt tone to confirm. If there is no prompt tone, it
indicates that the setting is invalid.
When changing the battery of remote control, reset the current time
and reservation time.
Remove the water tank
4
Put the machine flat, press inward the
buttons on both sides of the tank, and apply
backward force to remove the water tank.
, the current time can
.
).
) to
13