HTC Desire 500 Посібник - Сторінка 30

Переглянути онлайн або завантажити pdf Посібник для Мобільний телефон HTC Desire 500. HTC Desire 500 46 сторінок.

Usage

4.8. Operation

The machine's functions can be controlled using the control panel -

see Figure 3-3 on page 12.

During operation, the operator pushes the grinder forward over the

floor surface.

To activate the machine's functions, turn the ON/OFF knob to the

right. When the knob is in this position, the green Standby light

(DUTY) is lit, indicating that the machine is in standby mode.

The emergency stop switch, (EM-Stop) must only be used in an

emergency.

When the switch is pressed, all the electrically-powered equipment

on the machine is turned off.

Note!

Do not use the emergency stop switch to stop the machine ,other

than in emergencies, as it causes wear to the switch.

Note!

As long as the emergency stop switch (EM-Stop) is pressed in, the

machine cannot be started. Reset by turning the switch 45°, so it

pops out again. The machine can then be restarted.

For a description of the control panel, see Figure 3-3 on page 12.

Fill the tank with cold water.

Turn the tap on the left side of the machine to the open

position.

Turn the tap to the closed position once wet grinding is

finished.

Make sure the emergency stop switch is not activated.

HTC 500

1.0