HTC One X9 dual sim Короткий посібник

Переглянути онлайн або завантажити pdf Короткий посібник для Мобільний телефон HTC One X9 dual sim. HTC One X9 dual sim 2 сторінки.

Друкувати сторінку

HTC One X9 dual sim

___

Inserting your nano SIM and microSD cards

IMPORTANT:

Use a standard nano SIM only.

Don't cut a micro SIM or regular SIM card and insert it into the

nano SIM slot. It's thicker than the standard nano SIM card and

may get stuck in the slot.

Don't disassemble any part of the phone.

Don't try to open the phone or remove the battery by force. This

may damage the phone or its electronics and will invalidate the

warranty.

Don't throw the provided trays away.

You need them to insert your nano SIM cards.

1. With the phone facing

down, open the left slot

cover, and then remove the

nano SIM tray from the

SIM 1 slot.

To remove the nano SIM

tray, insert your fingernail

in the small groove in the

tray and then pull the tray

out.

2. Place your nano SIM card

into the tray with the gold

contacts facing up and the

cut-off corner facing out.

3. Reinsert the tray, and then

close the slot cover. When

reinserting the tray, make

sure the nano SIM card is

facing up so that it doesn't

fall out.

4. Open the right slot cover

and do the same steps as

above to insert your second

nano SIM card in the tray

that's in the SIM 2 slot.

Note: You can insert a 4G

LTE or 3G nano SIM card

in either slot. When you

have two cards inserted,

only one card can connect

to the 4G/3G network. The

other card will connect to

the 2G network only. To find

out how to set which card

connects to 4G/3G, see the

user guide.

5. Insert your microSD™ card

into the bottom slot, with

the gold contacts facing up

and towards the slot. Slide

the card all the way in until

it clicks into place.

6. To close the right slot cover,

slide the plastic hinge into

the side and press the cover

until it clicks into place.

___

Tips

• To restart your phone when it doesn't respond to touch

screen or button presses, press and hold the POWER and

VOLUME UP buttons for at least 12 seconds. When the

phone restarts, release the buttons.

• Check out our friendly walkthroughs and self-help in

troubleshooting basic problems with the HTC Help app.

, and then find and tap Help.

From the Home screen, tap

Or go to www.htc.com/support/ to find tutorials, the user

guide, and more. Please also read the Safety and regulatory

guide that's included in the box.

HTC, the HTC logo, HTC One, and HTC Sense are trademarks of HTC

Corporation

microSD is a trademark of SD-3C LLC.

All other company, product and service names mentioned herein are

trademarks, registered trademarks or service marks of their respective

owners.

htc.com

HTC One X9 dual sim

___

插入 Nano SIM 卡和 MicroSD 卡

重要：

只能使用標準的 Nano SIM 卡。

請勿裁剪 Micro SIM 卡或標準 SIM 卡並將其插入 Nano SIM 卡

插槽，因為這些 SIM 卡比標準的 Nano SIM 卡更厚，可能會卡

住插槽。

請勿拆解手機的任何部位。

請勿嘗試強制掀開手機或移除電池，否則手機或其電子零件可

能損壞，而使保固失效。

請勿丟棄隨附的固定座。

您需要這些固定座才能插入 Nano SIM 卡。

1. 將手機螢幕面朝下，打開左

側的插槽蓋，然後將 Nano

SIM 卡固定座從 SIM 1 插槽

中取出。

若要取出 Nano SIM 卡固定

座，請用指尖插入固定座

上的小凹槽，然後抽出固

定座。

2. 將 Nano SIM 卡金屬接點部

分朝上，截角處朝向插槽

外，依此方向放入固定座。

3. 裝回固定座，然後關上插槽

蓋。裝回固定座，確定面朝

上，以免固定座掉出。

4. 打開右側的插槽蓋，依照

上述的相同步驟將第二張

Nano SIM 卡插入 SIM 2 插

槽的固定座。

注意：您可將 4G LT E 或

3G Nano SIM 卡插入任一插

槽。但插入兩張 SIM 卡時

只有一張可連線到 4G/3G

網路，另一張只能連線到

2G 網路。如需瞭解如何設

定連線至 4G/3G 的卡片，

請參閱使用指南。

5. 將 MicroSD™ 記憶卡金屬

接點部分朝上，插入下方插

槽。往下壓進插槽中，直到

發出喀一聲為止。

6. 若要關上右側的插槽蓋，請

將塑膠轉軸往側邊推入並按

下外蓋，直到其卡入定位。

___

提示

• 如果觸碰螢幕或按下按鈕時手機都沒反應，請重新啟動手

機，按住電源鍵和調高音量鍵至少 12 秒。手機重新啟動

後，放開按鈕。

• 進入 HTC 小幫手應用程式，查看我們簡單易懂的教學步

驟，自行疑難排解基本問題。在主畫面上，點選

找出並點選小幫手。也可以造訪 www.htc.com/support/，

網站上提供了教學課程、使用指南等。亦請詳讀產品包裝

盒內提供的安全與法令注意事項。

HTC、HTC 標誌、HTC One 和 HTC Sense 均為宏達國際電子股份有限公司

(或稱宏達電) 的商標。

MicroSD 為 SD-3C LLC 的商標。

本手冊中所提及的其他公司、產品和服務名稱為其個別擁有者的商標、註

冊商標或服務標記。

htc.com

，然後