Bionaire BCH4821 Інструкція з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Обігрівач Bionaire BCH4821. Bionaire BCH4821 2 сторінки. Ceramic heater with viziheat

Друкувати сторінку

Bionaire BCH4821 Інструкція з експлуатації

BCH4821IUK06EM2 V.qxd

7/5/06

11:15

Page 4

BCH4821

Fig. 1

DESCRIPTIONS

A. Mode Control

B. Thermostat Control

C.Front Grill

D.Power Light

E. Integrated Carry Handle

F. Oscillation Button

G.Front Panel

OPERATING INSTRUCTIONS

Setting the Mode

1. For heater operation, turn the Mode Control (A)

to the desired setting:

I - Low setting (1000 Watts)

II - High setting (2000 Watts)

2. For fan-only operation, without any heat output,

turn the Mode Control (A) to the FAN (

ting. If the fan does not turn on, turn the

Thermostat Control to the maximum position.

3. The Power Light (D) will remain lit during

operation.

Setting the Thermostat

The thermostat maintains the desired tempera-

ture level by switching on and off.

1. Turn the Thermostat Control all the way to the

right (clockwise) to the maximum temperature

level.

2. When the desired temperature is reached,

slowly turn the Temperature Control back

(counter-clockwise) until the heater switches off.

3. The control will now automatically maintain the

pre-set temperature level by turning the heater

ON and OFF.

NOTE: It is normal for the heater to cycle ON

and OFF as it maintains the preset tempera-

ture. To prevent the unit from cycling, you

need to change the thermostat setting.

Oscillation Instructions

Press Oscillation Button (F) (

tion and press Button (F) again to stop the oscil-

lation.

VIZIHEAT

COLOUR CHANGING DISPLAY

Your heater features the revolutionary technology

and safety of ViziHeat™ Colour Changing

Display. As your heater warms up, parts of the

front grill will change colour - a visual reminder

that the grill is warm and the heater is on. The

exact timing of the colour change may vary.

When the heater is turned off, the grill will return

to its original colour, thus indicating the grill is

ENGLISH

cool to the touch. This may take up to an hour

depending on the environment surrounding the

heater and the cooling down time of the

element.

NOTE: If left in extreme cold temperatures

(- 22° F/-30°C) the ViziHeat™ color changing

display may not perform. The heater itself will

function normally. Store heater in a cool and dry

location.

NOTE: The ViziHeat™ colour changing effect

may wear off after continuous, heavy use of the

heater or in time. The heater will continue to

operate normally.

FROST-GUARD SETTING

This special setting will automatically turn on the

heater if the room's temperature reaches

freezing. To set, turn the Thermostat Control all

the way to minimum temperature level, and turn

the Mode Control to either HI (II) or LO (I).

AUTO SAFETY SHUT-OFF

) set-

This heater is equipped with a technologically

advanced, safety system that requires the user

to reset the heater if there is a potential overheat

situation. When a potential overheat temperature

is reached, the system will automatically shut the

heater off. It can only resume operation when the

user resets the unit.

To reset the heater

1. Turn MODE to OFF (

) and THERMOSTAT

to MAX (

2. Unplug unit, wait 30 minutes.

3. Plug in and turn ON.

Tip-Over Protection

When the unit is accidentally knocked over, it will

instantly shut off. To reset, simply place the

heater in an upright position.

Safety Back-Up Fuse

In the unlikely case the heater does not respond

to an overheat situation, the safety back-up fuse

will engage. In this case, the heater will not

reset. Please contact your local service number

on the back of the manual for advice.

) to start oscilla-

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety

precautions should always be taken including the

following:

1. Before connecting the heater, check that the

voltage indicated on the rating plate

corresponds to the main voltage in your

home/office.

2. WARNING: In order to avoid overheating, do

not cover the heater

3. DO NOT position the heater directly under a

BROWN

power socket.

BLUE

4. Do not use this heater in the immediate

Please note that the colour of these mains wires

surroundings of a bath, a shower or a

may not correspond with the colour markings

swimming pool.

that identify the terminals in your plug.

5. If the supply cord or plug is damaged, it must

Please proceed as follows:

be replaced by the manufacturer or its serv-

The BROWN coloured wire must be connected

ice agent or similarly qualified person in order

to the terminal, which is marked with the letter

to avoid hazard. The heater contains no user

"L" or is coloured RED.

serviceable parts. Should the product suffer

The BLUE coloured wire must be connected to

damage or breakdown, it must be returned to

the terminal, which is marked with the letter "N"

the manufacturer or their service agent.

or is coloured BLACK.

6. Under the environment with electrical fast

DO NOT CONNECT either of these wires to the

transient, the product may malfunction and

earth terminal in the plug. The earth terminal

require user to reset the product.

plug is marked with the letter "E", or with the

7. Do not use this heater with a programmer,

earth symbol

timer or any other device that switches the

GREEN and YELLOW.

heater on automatically, since a fire risk

exists if the heater is covered or positioned

incorrectly.

8. Only touch the heater with dry hands.

9. DO NOT position where it can be touched by

children, especially the very young.

10. DO NOT use this heater outdoors.

11. Allow a safe area around the heater away

from furniture or other objects; at least 50 cm

from the top and sides and 200 cm at the

front.

NOTE: If the terminals in the plug are not

12. Do not use this heater when it is lying on its

marked or if you are unsure or in doubt about the

side.

installation of the plug please contact a qualified

13. DO NOT use the heater in rooms with

electrician. If a 13A 3-pin plug is fitted, it must be

explosive gas (e.g. petrol) or while using

an ASTA approved plug, conforming to BS1363

inflammable glue or solvent (e.g. when gluing

standard. Replacement 13 A fuses must be BSI

or varnishing parquet floors, PVC etc).

or ASTA BS1362 approved.

14. DO NOT insert any objects into the heater.

GUARANTEE

15. Keep the mains cord at a safe distance from

the main body of the heater.

PLEASE KEEP YOUR RECEIPT AS THIS WILL

BE REQUIRED FOR ANY CLAIMS UNDER

16. If overheating should occur, the built-in

THIS GUARANTEE

overheating safety device will switch off the

• Your heater is guaranteed for 2 years.

heater.

• In the unlikely event of breakdown, please

17. Do not place the cord under a rug.

take your heater back to the place of purchase,

18. The heater is to be installed so that switches

with your till receipt and a copy of this guarantee.

and other controls cannot be touched by a

• The rights and benefits under this guarantee

person in the bath.

are additional to your statutory rights which

19. Avoid the use of an extension cord because it

are not affected by this guarantee.

may cause the heater to overheat.

• Holmes Products Europe undertakes within

For U.K. and Ireland only:

the specific period, to repair or replace free of

If the plug is not suitable for the socket outlets in

charge, any part of the appliance found to be

your home, it can be removed and replaced by a

defective provided that:

plug of the correct type. Please refer to

• We are promptly informed of the defect.

"Installation of a plug" below.

• The appliance has not been altered in any

Installation of a plug

way or subjected to misuse or repair by a

person other than a person authorised by

Applicable to U.K. and Ireland

Holmes Products Europe.

The wires in the mains lead are coloured as such:

• No rights are given under this guarantee to a

LIVE

NEUTRAL

or coloured GREEN, or

13 amp