HTC VIVE Посібник користувача - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник користувача для Гарнітури віртуальної реальності HTC VIVE. HTC VIVE 41 сторінка. How to use with steam
Також для HTC VIVE: Посібник з безпеки та регулювання (40 сторінок), Посібник з експлуатації (9 сторінок), Посібник користувача (27 сторінок), Посібник з монтажу (9 сторінок), Посібник (30 сторінок), Посібник (14 сторінок), Посібник з монтажу (5 сторінок), Як користуватися (3 сторінок)

Друкувати сторінку
HTC VIVE Посібник користувача
16
Hardware and product care
Charging the controllers
You can check the battery level of the controllers when no apps are running, or when the System
Dashboard is up. When the battery is low, the indicator will show a single red dot
Charge each controller using the provided power adapters and USB cables.
When the controller is plugged in and fully charged, its status light shows green if the controller
is on or white if the controller is off.
Turning the controllers on or off
To turn the controller on, press the System button until you hear a beeping sound.
§
To turn the controller off, press and hold the System button until you hear a beeping
§
sound.
When you quit the SteamVR app, the controllers will automatically turn off. The controllers
will also automatically turn off after being idle for a period of time.
Pairing the controllers with the headset
Once the controllers are turned on for the first time, they will automatically pair with the
§
headset.
The status light shows as blinking blue while the pairing is in progress. The status light
turns solid green when the controllers are paired with the headset.
§
To manually pair the controllers, launch the SteamVR app, tap
Devices Pair Controller. Follow the on-screen instructions to complete the process.
Attaching the lanyards to the controllers
Using the lanyards may help prevent the controllers from accidentally being dropped; however,
please do not fling or violently throw the controller because the lanyard may break.
1.
While holding the controller, insert the lanyard's thread from the top to the bottom hole.
2.
Loop the lanyard through the thread, and then tug the lanyard to fasten it in place.
3.
Place the lanyard on your wrist, and then adjust the lock to tighten the lanyard comfortably
around your wrist.
.
, and then select