HTC 420 VS Посібник - Сторінка 25

Переглянути онлайн або завантажити pdf Посібник для Підлогова машина HTC 420 VS. HTC 420 VS 50 сторінок. Floor grinder | concrete floor sander
Також для HTC 420 VS: Посібник користувача (46 сторінок)

Друкувати сторінку
HTC 420 VS
Note!
The dust extractor can be connected to both sockets found on
theprotective cover for the machine. If you only use one of the
sockets, thesocket not in use should be covered. Adjust the
capacity of the dustextractor to match the grinder.
2.
3.
4.

4.6. Preparations for wet grinding

Warning!
Check that the splash guard is fitted.
1.
Tip!
Never use a dust extractor, as it may cause blockages in the dust
extractorssuctionhose.
2.
3.
4.
Warning!
Only cold water with no chemical additives may be used.
5.
2.0
Inspect the floor carefully and remove any protruding
objects, such as reinforcement rods or bolts, and any loose
debris that could get stuck in the machine.
Attach the appropriate tool to the machine.
Set the handle to the required working position.
Always use liquid suction when wet grinding.
Inspect the floor carefully and remove any objects sticking
up, such as reinforcement rods or bolts, and any debris that
could get caught in the machine.
Attach the appropriate tool to the machine.
Set the handle to the required working position.
Fill the tank with cold water.
Operation
17