HTC 420 VS Посібник - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник для Підлогова машина HTC 420 VS. HTC 420 VS 50 сторінок. Floor grinder | concrete floor sander
Також для HTC 420 VS: Посібник користувача (46 сторінок)
Друкувати сторінкуHTC 420 VS
Introduction
1. Introduction
1.1. General
HTC 420 VS is a grinder that can be used to grind, strip, clean and
polish concrete, unhewn stone and terrazzo floors. The areas of
application for the machine depend on the choice of tool.
Read through this manual carefully so that you know how to use
and maintain the machine before using it. Contact your retailer for
more information. For contact information, see Contact Information
at the start of the manual.
1.2. Liability
Although every effort has been made to ensure that the information
in this manual is correct and complete, we accept no responsibility
for errors or omissions. HTC reserves the right to change the
descriptions contained in this manual without prior notice.
This manual is protected by copyright law and no part of it may be
copied or used in any way without the written approval of HTC.
1.3. Manual
In addition to general functions, this manual deals with areas of
application and maintenance of the grinder.
1.3.1. Safety instructions – explanation of symbols
In order to clearly mark particularly important sections, there are
a number of symbols in the manual – see below. In order to avoid
both personal injury and material damage as much as possible, it is
extremely important to read and understand the text next to these
symbols particularly carefully. Practical tips are also marked with a
symbol. These tips are to make it easier to use the machine and to
get maximum benefit from it.
The following symbols are used in the document to highlight for
the reader when to be observant.
This symbol means Warning! and indicates a risk of personal
injury or material damage in the event of incorrect use of the
machine or associated equipment. If you see this symbol next to
2.0
1