DICE DCR-300-CHG Посібник з монтажу

Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільні аксесуари DICE DCR-300-CHG. DICE DCR-300-CHG 1 сторінка. G2 universal cradle for ipod and iphone

Друкувати сторінку

Disclaimer and warranty

Important disclaimer, please read!

Unauthorized reproduction or reverse engineering is strictly prohibited! Intellectual property included is distributed under specific license

agreement with respective owners and is licensed only, not sold. No warranty, explicit or implied, is stated. Neither DICE Electronics, LLC., nor

any of its agents, distributors, dealers or vendors shall be liable for damages.

IN NO EVENT SHALL DICE ELECTRONICS' LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING

SOFTWARE OR ITS DOCUMENTATION.

For internal use only. Do not submerge or expose to water or other fluids. DICE G2 cradle is NOT water proof and it will be damaged by water.

You must properly insulate its casing if your installation environment may subject the unit to water, such as a convertible vehicle.

Keep away from children! DICE G2 cradle can be broken, or disassembled, and components may become loose from vibration and heat.

Small components and packaging materials may become choking hazard when handled by children.

Warning! Never place any objects directly into the path of an airbag. DICE Electronics does not accept any responsibility for any damage or

injury as a result of using this product. Exercise good judgment and keep your eyes on the road at all times!

DICE logo is a trademark of DICE Electronics, LLC. Kuda is a trademark of KUDA Group. iGrip is a trademark of HR GmbH & Co. KG. ProClip

is a trademark of ProClip USA Inc. The Made for iPod logo is a trademark of Apple Inc. The Works with iPhone logo is a trademark of Apple Inc.

Apple iPod is not included in the package.

Warranty and Support

If you experience any problems or need help, please contact you local dealer or call DICE Electronics, LLC. At 888-342-3999 or visit us at

http://diceelectronics.com/product-support

Products carry a 1 year limited warranty that protects you from defects in material and workmanship of products sold by DICE Electronics or its

authorized agents, distributors and dealers. The warranty period begins the day a product is purchased by the end user. Products found to be

defective during the warranty period will either be repaired or replaced by DICE Electronics at no charge unless warranty is void. Unauthorized

attempt of repair or alteration of the product in any way immediately voids this warranty. Warranty does not extend to cosmetics or finish. A DICE

product specialist must determine that a defect is present in the product and issue an RMA. Be sure that all wiring is connected as described

in the user manual and all related equipment is functioning properly. DICE Electronics disclaims any liability for other incurred damages

resulting from product defects. Any expenses in the removal and reinstallation of products are not covered by this warranty.

PLEASE NOTE: International customers requiring a product replacement, please contact the dealer your product was purchased from!

Mounting option

These holes are designed to allow you to

screw the cradle base to AMPS standard

mounts (ProClip

Use the screws (x4) in the package

These holes are designed to fit

to screw the cradle to AMPS

vehicle mounts from iGrip

standard mounts.

Connect the Cradle

cable connects

facing down

(back view)

(front view)

Marking is on the bottom side!

DICE G2 cradle

Universal Cradle for iPod and iPhone

Model: DCR-300-CHG

Installation Guide/User Manual

Table of contents

Disclaimer and warranty

Compatible iPod & iPhone

G2 cradle contents

...............................................3

Choose the correct holder

Installation

............................................................5

Mounting option

....................................................6

Connect the cradle

...............................................7

Long base installation

...........................................8

Adjusting the angle

...............................................9

Installation

, Kuda

, etc).

Slide the correct holder

onto the cradle until it

clicks.

Long base Installation

Attach the iPod dock

cable into the

connector on the back

of the cradle

If the long base will fit your car interior more appropriately than the short one,

then please follow the illustration to attach the long base to the cradle. Turn the

base clockwise to tighten the base to the cradle.

Compatible iPod & iPhone

......................................1

...................................2

....................................4

Slide the iPhone/iPod

into the holder

G2 cradle DCR-300/DCR-50 contents

DCR-300/DCR-50 cradle

additional holders x6

with regular base and

iPhone 4 holder x1

mounting screws x4

DCR-300/50 REV. 080510

Choose the correct holder

Compatible iPhone/iPod model can be found here.

Adjusting the angle

long base x1

Each holder is designed for a different

iPhone/iPod model. Identify the holder

by the printed text on the back of the

holder and choose the correct holder

for your iPhone/iPod.

To adjust the angle of the cradle, please

loosen the set screw enough for the cradle

to move freely. When you are done

adjusting the angle, hold the base and

tighten the set screw. DO NOT OVER

TIGHTEN!