Bionaire BAP531 Series Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Очищувач повітря Bionaire BAP531 Series. Bionaire BAP531 Series 11 сторінок. Air cleaner with aer1 filter series
Друкувати сторінку
F E A T U R E S - O P E R A T I O N S
Carbon Filter - Carbon filter absorbs and eliminates
common household odour, such as garbage or nursery
smells. To assemble carbon filter(s), remove from plastic
bag and remove the HEPA filter(s) from unit. Adhere the
hook fastener to the glue bead located on the exhaust
side of the HEPA filter(s). Adhere the carbon filter(s) to
the hook fastener and place the HEPA filter(s) back into
unit with the carbon filter(s) facing the exhaust side.
ASSEMBLY REQUIRED BEFORE USE
1. Determine desired orientation: horizontal or vertical
positioning. Follow DUAL POSITION instructions.
2. Select a firm, leveled surface where there are no
Figure 1
A
H
B
A
C
H
B
A. Control Panel
B. Base
C. Carbon Filter(s)
D. Long life True
HEPA Filter(s)
D
G
F
E
E. Washable Foam
Pre-filter
F. Anti-microbial Grill
G. Air Intake Grill
H. Filtered Air Outlet
obstructions to the air intake or filtered air outlet.
Place unit 1 foot (30cm) away from wall or large
objects.
3. Press the DOOR RELEASE button (
air intake grill, take out the anti-microbial grill and
check if any filter is covered by a plastic bag. If it is,
remove plastic bag before use. Attach the carbon
filter(s) onto the long life true HEPA filter(s). Reinstall
all filters and grill and then the air intake grill (see
Figure 1).
NOTE: The air purifier will NOT operate unless the air
intake grill is properly installed on unit.
DUAL POSITION
This air purifier is designed as multi-positional. Carefully
unpack your Air Purifier, locate the separately packed
base, small base cap and 4 suction cups inside the
package carton, please ensure to unpack all parts before
assembly.
Vertical Position
To operate in the vertical tower position, assemble the
base to the unit (see Figure 2). The widest part of the
base will be towards the front of the unit. You will hear a
"click" sound when the base is securely assembled with
Figure 2
Vertical
) to remove the
Air Purifier
Housing
Base