Alpha Communications NH908A Інструкція з монтажу та експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу та експлуатації для Підсилювач Alpha Communications NH908A. Alpha Communications NH908A 6 сторінок. Amplifier and power supply used with the ht2006 series inside handset intercom stations

Друкувати сторінку

Model

HT2003

Remote

Handset

Model

HT2006/5

Master

Handset

Model

HT2006/10

Master

Handset

INSTALLING THE R2007 AlphaTone™: When you

wish to replace the standard AC buzzer in the HT2003 or

HT2006 series handsets with the optional model R2007

AlphaTone™ unit, please follow these instructions:

1. Locate the silver AC buzzer in the lower right hand corner

of the handset base. Remove the set screw (and keep it for

re-use).

2. Gently pull up the two (2) wires from the buzzer that are

attached to the internal p.c. board. Carefully slide the wires

off of the connecting posts.

3. Install the R2007 AlphaTone™ in place of the buzzer,

using the buzzer set-screw.

4. Install the two (2) wires onto the p.c. board, using the

same connecting posts that the buzzer used. Polarity does

not matter.

5. Position the wires inside the handset base, so they will not

get 'pinched' when the cover is placed over the base.

6. Using a small screwdriver, you can change the AlphaTone's

sound, by adjusting the built-in potentiometer found on the

p.c. board of the R2007.