BIONIME Rightest GM700 Посібник для початківців
Переглянути онлайн або завантажити pdf Посібник для початківців для Глюкометр для вимірювання рівня глюкози в крові BIONIME Rightest GM700. BIONIME Rightest GM700 2 сторінки.
Друкувати сторінкуGM700 GETTING STARTED GUIDE
Up Button (
)
For operating the
meter, please check
details in following
sections.
Down Button (
)
For operating the
meter, please check
details in following
sections.
Display Window:
Show your test result,
messages and relative
information.
Front View of Meter
Sample Entry
Test strips
View Window
Test strips vial
Control Solution
1
Batteries Installation
1) Turn the meter over. Press and push battery cover to open.
2) Install the battery. Be sure to put battery in correct direction.
3) Slide the battery cover back until it snaps into place.
( For self-testing )
Test Strip Port:
Insert test strip here until
you hear a click.
Auto Code Key
Auto Code Release Button:
Please contact the local
service for help, if needing to
change the auto code key.
Main Button (
)
Battery Cover:
Slide cover to
Press to turn on/off
change batteries.
meter or go into
setting model.
Back View of Meter
Depth adjustable cap
Release button
Lancet carrier
Safe switch
Hub
Lancing Device
Protective cover
2
Auto Code Key
Auto code key has the function of auto-coding. The meter can automatically detect the code number
on strip, and hence it is no need to change code key unless it's malfunctioned.
1
NOTE
- Please contact the local service for help, if needing to change the auto code key.
3
Setting Up Your Meter - Set the Date, Time, Volume and Measurement Unit
1) Press and release main button "
2) Press and hold main button "
you go into setting mode, you will see power off first. Please keep pressing it until you go into the
setting mode. The year will flash.
3) Press up button "
4) Press main button "
Plunger
Lancet
5) Repeat steps 3 and 4 to change the date, time format, hour, minute and measurement unit.
After pressing the main button to confirm the measurement unit, your set-up has been finished.
2
" to turn on the Meter.
" for seven seconds until you go into the setting mode. Before
" or down button "
" to change the year.
" to confirm the year and move to month setting.