Dickson SP150 Початок роботи - Сторінка 4

Переглянути онлайн або завантажити pdf Початок роботи для Реєстратори даних Dickson SP150. Dickson SP150 9 сторінок. Pro logger
Також для Dickson SP150: Операція (2 сторінок)

Друкувати сторінку

Getting Started

• Install the DicksonWare™ Software.

• Connect the cable (supplied with the software) to the logger and to a working serial port on your

computer.

• Click the Setup button. When the setup window appears, all fields should be automatically filled in, this

will confirm that DicksonWare™ has recognized the logger. Should all fields remain blank, refer to "No

Communication" in the Trouble Shooting section of this manual. Once DicksonWare™ recognizes the

logger, press the Clear button. This will delete all data currently stored.

• The logger is now sampling and ready for use. The default sample interval is 1 minute. Verify that the

indicator light is flashing every 10 seconds. You may choose to change Default settings for sample interval

and start-date and time. When changing these settings, the logger will automatically go through the

clear process to accept your changes.

NOTE: To conserve battery life when storing unit, press the Setup button and select the shortest Sample

Interval and Stop When Full in the Samples section or remove the battery for SX100, SX120, and TX models.

DicksonWare™ Software Specifications

• Microsoft Windows® compatible

• Allows for simple viewing and zooming of logged data

• Easy set-up of Dickson Data Loggers including:

• User selectable sample intervals from 10 seconds to 24 hours

• Display temperature in °C or °F

• Delayed logger start times

• Logger data capacity can be set to wrap data or stop when full

• Allow for real time monitoring and graphing.

• Effortless exporting of data and graphs to other software

• Data can be viewed in tabular (numeric/table) or graphical formats

• Fast downloading of logged data - 30 seconds (typical) from full logger

• Even shows battery power status for battery operated loggers

Specifications:

Compatible With: Microsoft Windows® 95, 98, 2000, NT & XP

PC Requirements: PC with 386 MHz or better microprocessor, 4 M RAM, 1 free COM (serial) port, CD

drive

Cable Type/Length: 9 pin male D-shell to male 2.5mm stereo plug, 6' long

Computer Interface: RS-232 COM (serial) port

DicksonWare™ Version Required (minimum): See Specific Model for Version Requirement

Rev. 09/06

03030901