Dickson TP425 Початок роботи - Сторінка 2

Переглянути онлайн або завантажити pdf Початок роботи для Реєстратори даних Dickson TP425. Dickson TP425 2 сторінки. Temperature & humidity data logger

Друкувати сторінку

Press Button to Start

This feature needs to be selected when the logger is setup (Setup/Samples). Hold down the Start/Stop button on the front of

the unit until "ON" appears on the display. The logger is now logging. Pressing the button again will stop logging.

Need to Know



When changing logger settings (sample interval and start date and time) the logger will automatically clear all stored

data



To achieve longer battery life during operation, use a less frequent sample rate and disconnect the unit from the USB or

serial port when not downloading data

Fahrenheit/Celsius

The data logger is defaulted to log data in Fahrenheit. If you want to view future logged data on the graph or table in Celsius

go to "File," "Preferences" and then change the temperature selection.

Battery Replacement

The battery level monitor on the "Setup" screen displays the battery voltage and a low battery warning when replacement is

needed. When changing the battery the logger will not collect data however memory will not be lost. To start sampling again,

download the data and then clear the memory.

Setting Plot Style

Spline and Points & Spline should not be used as they will auto fill the graph over the period(s) where the logger is off and not

logging.

Start Mode

This logger has three start modes:

1. No Delay

2. Press Button to Start

3. Start after Delay

Each time the logger is cleared it will default to No Delay and start logging immediately. To change start mode clock on the

Start Date/Time Setup button and select Delay Type. Click ok.

Warranty

Dickson warrants this line of instrument will be free from defects in material and workmanship under normal use and service

for a period of twelve months after delivery. This warranty does not cover routine calibration and battery replacement.

For Specifications and Technical Support go to www.DicksonData.com.