Alpha Fan E-Light Pro/40 Інструкція з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вентилятор Alpha Fan E-Light Pro/40. Alpha Fan E-Light Pro/40 13 сторінок.

TRANSMITTER LEARNING PROCESS

The receiver & transmitter is pre-programmed in factory. If you wish to control 2 or more fans using

1 transmitter, the below steps is required.

DO NOT PRESS ANY OTHER BUTTON ON THE TRANSMITTER DURING THIS PROCEDURE.

a) Turn on the power supply (wall switch) to the fan.

b) Within 30 sec, use a test pen to press and hold the "LEARN" button for 3 sec. Once the receiver has

detected and learned the frequency, the light on fan will be lighted and fan will be working at low speed

and process is completed and fan is ready to use.

Forward Reverse

Anti-clockwise or

clockwise rotation

Learn

Press and hold for 3 sec

Light

Light control

Power

Turn off fan

Natural Wind

Fan speed changes within

its range creating gentle

sea-breeze effect

Timer On

1h - Fan turns on after 1 hour

TIMER ON

3h - Fan turns on after 3 hours

6h - Fan turns on after 6 hours

8h - Fan turns on after 8 hours