Alpha Fan HANI-5B/36 LED Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Вентилятор Alpha Fan HANI-5B/36 LED. Alpha Fan HANI-5B/36 LED 8 сторінок.
Також для Alpha Fan HANI-5B/36 LED: Інструкція з експлуатації (8 сторінок)
Друкувати сторінкуa1. Route all the wires & Safety Wire from the Motor
through the Fan Rod.
a2. Fix the Fan Rod to the Motor Assembly with Bolt
Washer, Nut and tighten them firmly then insert
the Clevis Pin.
IMPORTANT : CLEVIS PIN MUST BE INSERTED
TO PREVENT NUT FROM LOOSENING.
a3. Tighten the Fan Rod Support Screw.
a4. Assemble the Canopy and Coupling Cover
through the Fan Rod
a1
a2
a3
a4
Complete
Canopy
Coupling
Cover
Fan Rod
Fix the Rubber Pulley Assembly to the Downrod
with Bolt, Washer, Nut and tighten them firmly, then
insert the Clevis Pin.
Step 3
a. Remove the Bolt, Clevis Pin, Nut, Washer and
Rubber Pulley from the Fan Rod.
b. Place the Rubber Pulley onto the ceiling hook
and fix back the Bolt, Clevis Pin, Nut and Washer.
Rubber
Pulley
Clevis Pin
Nut
Washer
Safety Wire
4
Step 4
a. Remove the Safety Wire screw and spring washer
from the Downrod.
b. Tie the Safety Wire across the hook as shown and
firmly screw the Safety Wire onto the Downrod.
Step 5
a. Connect the Connectors from Fan and Receiver.
b. Connect the wires from the receiver to House
Supply Wire.
c. Connect Earth Wire to House Supply Earth
Terminal.
House Supply Wires
Brown (L)
Green/Yellow(E)
Blue (N)
Orange
Orange
Green/Yellow(E)
Blue
Blue
Brown (L)
Blue (N)
White
White
Yellow
Yellow
Grey
Grey
Green/Yellow(E)
*For HANI-5B/36 LED only
Step 6
Install the Blades on Motor with Screw.
5