dicodes Dani Box Micro Посібник - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник для Електронні сигарети dicodes Dani Box Micro. dicodes Dani Box Micro 18 сторінок.

06 Extended Functions Menu

Additional Explanation to several menu items, page 1

In the following paragraphs, explanations are given for those parameters and items, which are not self

explanatory or which have interdependencies with other parameters or functions.

The coefficient of this "Other" wire is adjusted in this menu item. Note that stainless steel wires and also

titanium wires often have not well defined coefficients, depending on their exact alloy composition.

The TCoef item in the menu is visible, even if the operation mode is not selected to temperature

controlled vaping.

Power Limit defines the adjustment range of the power in the main menu. As stated

"Power". The power limitation makes sense especially in the power vaping mode to

reduce the range to the used atomizer.

user is unsure whether her/his specific battery meets this specification, the level should be set to 2.7V.

The selected voltage is the

voltage at the electronics

input, when current is

drained from the battery

(Ub,L). In contrast to other

available tube- and box-

mods on the market, which

stop operation already at

3.4V, the lower discharge

level on dicodes mods

lead to a better battery

utilization.

At UBatMin+ 0.7V a power reduction is activated depending on the actual power setting. The reduction

starts when the power selected hits the slope from Ubat,min@10W to Ubat,min+0.7V@80W as shown

in the diagram above.

This provides the best utilization of the battery. When off, the device draws zero current from the battery.

Note that if the mod was actively switched off by the user (5 times fast clicking of the fire button), the

instant power on is not available. In this case the mod has to be switched on with 5 clicks first.

The selection of the correct wire-temperature-coefficient is very important for the

correct operation of the mod, when temperature controlled vaping is selected.

As soon as TC-mode is selected, a multiple choice list of commonly used wires types

with predefined coefficients is displayed and the wire type "Other".

in the main menu already, the limit value sets the roll-over or stop point of the menu

All dicodes devices have a functionality to adjust the minimum discharge level of

the battery between 2.5V and 3.0V (older models 3.5V). Almost all available

batteries on the market specify the minmum discharge level of 2.5V to 2.7V. If the

The time to automatic power off the device can be selected between 1 minute

up to 60 minutes. We recommend to choose 1 or 2 minutes, because the mod

is always immediately on and ready to vape, when the fire button is pressed.