dicodes Dani 25 Посібник - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник для Вейпер dicodes Dani 25. dicodes Dani 25 14 сторінок.
Друкувати сторінку
06 Extended Functions Menu (Page 1: Overview)
Increase wire
temperature
coefficient (*1)
[320]
Decrease wire
temperature
coefficient (*1)
Set Power Limit
(80Wmax.)
[80W]
Select heater
protection mode
(1..10) [6]
Select power
boost mode
(1..10) [3]
Only visible when
Expert Mode =1
(*1 ) The temperature coefficient selects the type of wire material, range 50 to 650: When TC-mode is selected
(Main menu HCtrl=1), the user must select the wire type to be NiFe30 (dicodes wire), Ni200, Titanium, Stainless
Steel SS316L, Stainless Steel (Inox) or "Other". The value for "Other" is adjusted here. The values of the predefined
wire-types are 320=dicodes-wire, 620=Nickel, 92=SS316L, 105=SS304/INOX, 350=Titanium (varying literature values,
danger: fire harzard). Value to select = Literature-value*10E5 K. Example: Ni 6.2E-3*1/K * 10E5*K => 620
(*2 ) Setting 1 (fastest) as 2 but without animation (visual shift effect), setting 5 (slowest) as 4, but without
fast auto-repeat.
(*3 ) When temperature controlled vaping mode is selected and with display mode=cont, the current values of
"Power", "Temperature" and "Wire-Resistance" can be observed during the vape. In standard mode, the battery
symbol, power and resistance is displayed. In Bypass mode the calculated power is displayed.
With display mode =post these parameters are displayed after the vape with the latest values. With display
mode=off, value are displayed neither during nor after the vape..
Set the minimum bat
discharge level
(2.5..3V) [2.7]
Set display luminosity
(1 low to 5 high
brightness) [4]
Select auto power
off time (1-2-5-10-15-
20-30-60 minutes)
[5min]
Select number of clicks
to switch on mod (0..5).
0=> immediate vape
[1]
Select number of clicks
to get into the menu
(1..5). [1]
Speed for button
usage (1 fast..5 slow).
(*2 ) [3]
Select wattage steps
1W/0.5W (<20W),
2W/1W (20-40W),
5W/2.5W (>40W) [1]
Selects temperature
unit either °Celsius or
°Fahrenheit. [°C]
Parameter display
during vape
off/post/cont (*3)
[cont]
Select display
orientation between
Left and Right [R]
Select Expert mode to
enable power boost,
heater protection and
bypass mode. [0]
Switch back all settings
to factory defaults
Counts the number of
puffs since last counter
reset.
Displays pure vaping
time in H:MM:SS since
last counter reset
Energy taken from
battery during vaping
since last counter reset
Displays battery
capcitance since last
counter reset (can
show battery quality)
Reset the counters
above.
Total lifetime puffs
of mod.
Not resettable.
Total lifetime vaping
time of mod in
HHHH:MM
Not resettable.
Defaults in
[brackets]