EPCO 2418 Посібник - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник для Снігоочисник EPCO 2418. EPCO 2418 8 сторінок. 48" snowblower for epco power king
Друкувати сторінкуPARTS LIST FOR WEASLER COUPLING
ITEM P/N
201 C4R6
202 2105-33
203 11B55-3
204 11N85
205 11W80
DESCRIPTION
SPIDER
....
RUBBER
DISC
BOLT.
NUT.
WASHER
.. .3/
4"
Bore
and
Keyway
.5/
16"-
18
x
1-112"
Long Grade
5
.................... 5/
16"- 18 Lock
........
.Beaded
The above parts and their part
numbers
reler to the
parts which
are serviced
by Weasler
Engineering Inc
.,
Box
558,
West Bend, Wisconsin 53095
.
II
replacement
parts
are needed
please order
them
directly
lrom Weasler
.
WEASLER COUPLING
ASSEMBLY
202
A
SAFETY RULES
A
TRAINING
1.
Regard your snow blower as a piece of power equipment
and teach this regard to all who operate it
2. Never allow children or young teen-agers to operate the
tractor and snow blower.
3. Be sure you know how to stop the tractor and snow blower
at a moment's notice.
4. Instruct children to keep away from the area of operation
at all times.
PREPARATION
1. Check the tractor and snow blower to make certC!in both
are in good operating condition.
2. Fill gas tank out of doors and avoid spilling gasoline
over engine. Do not fill tank with gasoline while smoking
or while engine is running.
3.
Do not remove any guards or covers while operating
tractor and snow blower.
OPERATION
1.
Give complete and undivided attention to the job at hand.
2
.
Keep the area clear of all persons, particularly small
children.
3. Stop engine when tractor
is
unattended.
4
.
Disengage snow blower clutch when someone
approaches.
5. Do not allow anyone other than the operator to ride on
the tractor or to be towed
behind.
6.
Extreme caution should be exercised under slippery
conditions.
Reduce forward speed
.
Install tire chains to
traction wheels for added
safety.
7. Do not attempt to clear auger or discharge elbow while
engine is running.
8
.
When changing position of the deflector, disengage the
auger clutch
.
9. Never direct snow discharge at people or
buildings.
6
10.
Disengage snow blower clutch when transporting
.
11
.
If snow blower becomes plugged with snow, or jammed
due to hitting a foreign object, declutch snow blower
immediately
and stop tractor engine. Clear snow from
spout if plugged, before resuming operation.
-CAUTION-
NOTE: If auger is jammed, or bent from hitting foreign ob-
ject, remove spark plug wires from tractor engine spark
plugs and then remove foreign object from auger. If auger
damage is noted, repair prior to continuing operation
.
Then
replace spark plug wire and resume operation.
MAINTENANCE AND STORAGE
1.
Follow implicitly the manufacturer's recommendations
for
maintenance.
2.
Have a competent serviceman make thorough
inspection
of the snow blower before the snow season begins.
3.
Store gasoline in a safe container. Store container
in
a cool, dry place, not
in
the house or near heating appli-
ances.
4. Keep the snow blower tractor and gas container
in
locked
storage to prevent children from playing and tampering
with them
.
5.
Maximum snow removal results and safety can be ex-
pected only
if
the snow blower is maintained and operated
correctly.
6. Gasoline powered equipment or fuel containers should
not
be stored
in
basement or in any closed area where
heating appliances or open pilot lights are present, unless
fuel
is
completely drained from power equipment or
fuel·
containers.