Epcom PROAUDIO SF-4240UC Посібник з експлуатації - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Підсилювач Epcom PROAUDIO SF-4240UC. Epcom PROAUDIO SF-4240UC 20 сторінок. Class d power amplifier

Друкувати сторінку

6. SCREEN OPERATION INSTRUCTIONS

1. Home

The homepage is mainly composed of the three function icons of "Audio matrix", "Multimedia"

and "Volume" and the status area below, which will display different status information in

different states. On the home page, you can use the "MENU" knob to switch the cursor to

select a function, and short press the "MENU" knob to enter that function.On the home page,

you can also use the "MODE" button to switch the multimedia function mode ( except for the

recording mode). The recording mode can be switched by the "MODE" button on the multimedia

interface, or switch to this mode by default when both the U disk and TF card are removed.

Left: no status display

2. Audio matrix

The audio matrix interface is used to configure the switch of each channel of the audio matrix, as

shown in the figure below, you can use the "MENU" knob to switch the cursor to select the channel

to be configured, and then short press the "MENU" knob to switch the state "ON" or "OFF", one

output channel CHx allows up to 4 input channels to be connected simultaneously.

Left: Audio matrix page 1

1. Return button;

4. Channel switch status: "ON" or "OFF";

5. Page number information and page turn button.

3. Multimedia

3.1 Music center

The interface of the music center is shown below:

1.Return button;

2. TF mode indication, when it is not highlighted,

it means it is not TF mode;

3. Volume;

4. The total number of recognizable songs on the

media USB or TF;

5. Play progress bar;

2. Input channel;

3. Output channel;

Right: status display

Right: Audio matrix page 2

7 8