Epever EPIPDB-COM-20 Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Контролер Epever EPIPDB-COM-20. Epever EPIPDB-COM-20 8 сторінок. Dual battery solar controller
Друкувати сторінку
Note: in the normal charging status, the controller will divide the charging
as the setting. While battery #1 is fully charged, more charge current will be
diverted to battery #2, and return to the setting charging automatically
when the battery #1 is in low voltage.
When the controller detects there is only battery #1, all the charging will go
to the battery #1 automatically.
rd
3.
3
led is for charging frequency.
Number shows
3.Trouble shooting
1.
LED blinking, short circuit, check the PV and battery, and make sure
that they are in correct connection
2.
LED slowly flashing, fully charged
3.
LED ON, on charging
4.
LED frequent flashing, with battery, no charging
5.
LED OFF, no battery or over voltage
2
3
4
5
6
7
8
9
90%(pre-set)
PWM Charging frequency
0
1
2
20%
30%
40%
50%
60%
70%
80%
25Hz(pre-set)
50Hz
100Hz
3
80%
70%
60%
50%
40%
30%
20%
10%