Dictator EM GD 60 S Технічні дані - Сторінка 2

Переглянути онлайн або завантажити pdf Технічні дані для Блок управління Dictator EM GD 60 S. Dictator EM GD 60 S 4 сторінки. Electromagnet with swivel head. for installation on the floor, wall or ceiling

Друкувати сторінку

Electromagnets

Installation

Dimensions

Order Information

Page 07.032.00

You can either fix the electromagnet with swivel head to the floor, ceiling or wall. If you

want to change the position of the head, you need to loosen the locking screw and turn

the head by 90°.

If you need to cut the distance tube, remove the head after loosening both grub screws

which fix the head to the tube. Then pull out the wires connected to the interruption key.

An anchorplate needs to be fixed to the door as a counterpart to the magnet. A choice

of different counter plates can be found later in this section.

The connection wires are inserted through an opening in the mounting plate. After the

magnet has been properly mounted and wired, both plastic covers are pushed from the

side over the mounting plate and clipped into position.

Please note:

It must be possible to release a fire protection door held open by an electromagnet with

a hand switch which is not hidden by the opened door. (DICTATOR hand switch part no.

040005, see diagram on the left).

ø 60

ø 48

Model

GD 60 S 175

GD 60 S 175 oT (ohne Taster =

without interruptor key)

GD 60 S 175 S

GD 60 S 325

GD 60 S 475

Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 1067

ø 40

ø 96

Force

Length "L" Height "M" Part no.

700 N

175 mm

107 mm

700N

175 mm

107 mm

1000 N 175 mm

107 mm

700 N

325 mm

257 mm

700N

475 mm

407 mm

040111

040264

040164

040112

040113