Alpha Moisture Systems DS1200-AMT Посібник з монтажу, введення в експлуатацію та експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу, введення в експлуатацію та експлуатації для Вимірювальні прилади Alpha Moisture Systems DS1200-AMT. Alpha Moisture Systems DS1200-AMT 18 сторінок. Dewpoint analysis system
Друкувати сторінку
1 Safety Instructions
• This DS1200 is designed for connection to hazardous electric voltages. Ignoring
this warning can result in severe personal injury or mechanical damage. To avoid
the risk of electric shock and fire, the safety instructions of this manual must be
observed and the guidelines followed. The specifications must not be exceeded,
and the DS1200 must only be applied as described in the following pages. Prior to
the commissioning of the DS1200, this manual must be examined carefully. Only
qualified personnel (technicians) should install this DS1200.
• If the DS1200 is used in a manor not specified by the manufacturer, the protection
provided by the equipment may be impaired.
• Until the DS1200 is installed, do not connect hazardous voltages to the DS1200.
• Trouble shooting of the DS1200-AMT System should only be carried out on a
disconnected DS1200-AMT and under ESD safe conditions.
• Repair of the DS1200 must be done by Alpha Moisture Systems, or authorised
distributors, only.
1.1
Definitions:
•
Hazardous voltages have been defined as the ranges: 75 to 1500 volt DC, and 50 to 1000v volt AC.
•
Technicians are qualified persons educated or trained to mount, operate, troubleshoot and technically
correct, in accordance with safety regulations.
•
Operators are persons, being familiar with the content of this manual, able to adjust and operate the
DS1200 during normal operation.
1.2
Receipt and Unpacking:
•
Unpack the DS1200 without damaging it and make sure that the manual always follows the DS1200
and is always available. The packing should always follow the DS1200 until this has been
permanently mounted
•
Check at the receipt of the DS1200 whether the type corresponds to the one ordered.
1.3
Environment:
•
Avoid direct sunlight, dust, high temperatures, mechanical vibrations and shock, as well as rain and
heavy moisture. If avoidance of high moisture is not possible, employ ventilation, rather than
increased temperature, to prevent condensation.
•
The DS1200 falls under the installation Category II, pollution Degree 1, and Insulation Class II.
1.4
Normal Operation:
•
Operators are only allowed to adjust and operate the DS1200 when safely fixed to a panel, thus
avoiding the danger of personnel injury and damage. This means there is no electrical shock hazard,
and the DS1200 front panel is easily accessible.
1.5
Cleaning:
•
When disconnected, the DS1200 may be cleaned with a cloth moistened with distilled water or ethyl
alcohol.
Warning!
Warning!
Page 1