Axis 152 Посібник зі швидкого встановлення - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Сервер друку Axis 152. Axis 152 8 сторінок. High performance multiprotocol print server for virtually all networks
Друкувати сторінку1. To start the Add Printer Wizard, select settings - Printers from
the Start Menu and double-click on the add Printer icon.
2. The Wizard asks you to select between My Computer and
Network Printer Server. Select My Computer. Click Next>.
3. Click Add Port... in the Available ports dialog. Select AXIS Port
and then click New Port...
4. Select the AXIS port you wish to add and then click OK. The
ports appear as <name>.LP1 and <name>.LP2, where <name> is
AX followed by the last six digits of the AXIS 150/152 serial
number, e.g. AX560B35. Click OK.
5. Close the Printer ports Window.
6. Click the Configure Port... button and choose when pop-up
messages are to be displayed. Check the appropriate boxes and
then click OK. Continue the installation by clicking Next>.
7. Choose the appropriate print driver for your printer from the
manufacturer and model lists displayed.
8. Enter an appropriate name for your printer and click Next>.
9. Choose whether you wish to share the printer with other network
users and click Next>.
10.Choose whether you wish to produce a Test Page and then click
Finish. The Axis Printer Port is now installed.
Client-server printing:
The AXIS Print Monitor is not needed on the client platforms for
client-server printing.
Windows 3.1
Windows 3.1 requires network support such as LAN Server or LAN
Manager Workstation software to be installed in order to redirect a
local printer port to a network device. When installed, proceed as
described under Windows for Workgroups below.
Windows for Workgroups
All Windows 3.1 and Windows for Workgroups users, requiring
access to a network printer in peer-to-peer mode, will need to install
the AXIS Print Utility for Windows onto their workstations.
Client-server printing:
This print method is suitable for larger networks and requires only
one user to install the AXIS Print Utility for Windows software onto
their workstation. The setup procedure is described below:
1. Install the AXIS Print Utility for Windows onto the file server.
2. Set up your AXIS 150/152 from the file server as described in the
peer-to-peer printing section below, but additionally check the
Share box for your printer.