Axis 640 series Посібник зі швидкого встановлення - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Сервер друку Axis 640 series. Axis 640 series 12 сторінок. Ethernet and token ring print servers
Також для Axis 640 series: Специфікація (6 сторінок), Посібник користувача (4 сторінок)
Друкувати сторінкуNetWare
Follow the instructions detailed below, to install your AXIS
540/640. If you are using NDPS, you must install the HP Gateway,
together with NDPS, on your file server. Otherwise you must install
your AXIS 540/640 with the AXIS NetPilot™ Installation Wizard.
NetWare using NDPS (Public Access Printer)
1. Make sure that the HP Gateway is configured to automatically
create a public access printer.
2. Connect the AXIS 540/640 to the NetWare network, if it is not
already connected.
The HP Gateway will automatically create a public access printer, to
which any user will have access.
NetWare using NDPS (Controlled Access Printer)
1. Make sure that the HP Gateway is not configured to
automatically create a public access printer.
2. Connect the AXIS 540/640 to the NetWare network, if it is not
already connected.
3. Use the NetWare Administrator to create an NDPS printer as an
object in the directory.
As a directory object, access to the NDPS printer is controlled and it
is not available as a public access printer.
NetWare not using NDPS
Install your AXIS 540/640 with the AXIS NetPilot™ Installation
Wizard, supplied on the AXIS Utilities disk. Please note that AXIS
NetPilot™ software requires a Windows platform that uses
NetWare or NetBIOS/NetBEUI.
1. Load the AXIS NetPilot™ software by following the instructions
on the label of the AXIS Utilities disk. After loading the software,
double click on the AXIS NetPilot™ icon. AXIS NetPilot™
then scans the network for all connected Axis Network Print
Servers.
2. AXIS units previously installed using the AXIS NetPilot™
appear as 'Network Print Servers' and un-installed units are
featured as 'New Axis Units'. Select your AXIS 540/640 from the
'New Axis Units' sub-folder and then click the Install icon. The
Installation Wizard guides you through the basic installation.
Click the Help icon should you require assistance throughout any
stage of the operation.
To set up print queues:
1. Open the 'Network Print Servers' folder and select the Network
Print Server you wish to set-up.
2. Choose 'Network' from the Toolbar or Setup menu.