Axis A4020-E Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для фотоапаратів Axis A4020-E. Axis A4020-E 7 сторінок. Reader/reader with keypad
Також для Axis A4020-E: Посібник користувача (7 сторінок)

Друкувати сторінку

AXIS A4x20 Readers

Troubleshooting

Reset to factory default settings

A reset to factory default resets all settings to the factory default values.

1. Remove the device from the backplate. This disconnects power from the device.

2. Remove the connector from the backplate.

3. Use a blunt instrument to press and hold the control button while you reconnect power by connecting the terminal block

to the pins in the device. See Product overview on page 5 . You will hear a short beep when you reconnect power. It

indicates that the control button is pressed.

4. Keep the control button pressed for a few seconds.

5. Release the control button. You will hear a beep that indicates that the device has been reset to the factory default settings.

6. Put the terminal block in its place in the backplate.

7. Hook the device onto the backplate and close the unit slowly.

To watch this video, go to the web version of this document.