DieHard 200.713201 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Зарядний пристрій DieHard 200.713201. DieHard 200.713201 16 сторінок. 20/15/10/2 amp fully automatic battery charger
Також для DieHard 200.713201: Посібник користувача (16 сторінок)

Друкувати сторінку

Charge Time Needed if Amp-Hours is Known

• Find the Charge Factor for your battery in the table on page 11.

• Multiply by the Amp-Hour rating of the battery.

• Divide by the Charger Setting (either 2 Amp, 10 Amp or 20 Amp).

• Multiply by 1.25 to get the approximate Hours Needed to bring the battery to full

charge.

Example: 15 Amp-Hour (AH) Battery, 50% State-of-Charge,

[(AH x Charge Factor) ÷ Charger Setting] x 1.25 = Hours Needed

(15 x 0.5 ÷ 2) x 1.25 = 4.7 Hours

Charge Time Needed if Reserve Capacity is Known

• Find the Charge Factor for your battery in the table on page 11.

• Multiply by the Reserve Capacity rating of the battery.

• Divide by the Charger Setting (either 2 Amp, 10 Amp or 20 Amp).

• Multiply by 0.73 to get the approximate Hours Needed to bring the battery to

full charge.

Example: 95-Minute Reserve Capacity (RC) Battery, 25%

[(RC x Charge Factor) ÷ Charger Setting] x 0.73 = Hours Needed

[(95 x 0.75) ÷ 20] x 0.73 = 2.6 Hours

To keep your battery charger working properly for years:

1. Clean the clamps each time you are

finished charging. Wipe off any

battery fluid that may have

come in contact with the clamps to

prevent corrosion.

2 Amp Charger Setting

State-of-Charge, 20 Amp Charger Setting

MAINTENANCE AND CARE

2. Coil the input and output cords

neatly when storing the charger.

This will help prevent accidental

damage to the cords and charger.