DieHard 200.713201 Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Зарядний пристрій DieHard 200.713201. DieHard 200.713201 16 сторінок. 20/15/10/2 amp fully automatic battery charger
Також для DieHard 200.713201: Посібник користувача (16 сторінок)
Друкувати сторінку
Charge Time Needed if Amp-Hours
is Known
•
Find the Charge Factor for your battery in the table on page 11.
•
Multiply by the Amp-Hour rating of the battery.
•
Divide by the Charger Setting (either 2 Amp, 10 Amp or 20 Amp).
•
Multiplybyl.25togettheapproximateHoursNeededtobringthebatterytofull
charge.
Example:
15Amp-Hour (AH) Battery, 50% State-of-Charge,
2 Amp Charger Setting
[(AH x Charge Factor) - Charger Setting] x 1.25 = Hours Needed
(15 x 0.5 - 2) x 1.25 = 4.7 Hours
Charge Time Needed if Reserve Capacity is Known
•
Find the Charge Factor for your battery in the table on page 11.
•
Multiply by the Reserve Capacity rating of the battery.
•
Divide by the Charger Setting (either 2 Amp, 10 Amp or 20 Amp).
•
Multiply by 0.73 to get the approximate Hours Neededto bring the battery to
full charge.
Example:
95-Minute Reserve Capacity (RC) Battery, 25%
State-of-Charge, 20 Amp Charger Setting
[(RC x Charge Factor) - Charger Setting] x 0.73 = Hours Needed
[(95 x 0.75) ÷ 20] x 0.73 = 2.6 Hours
To keep your battery charger working properly for years:
1. Clean the clamps each time you are
finished charging.
Wipe off any
battery fluid that may have
come in contact with the clamps to
prevent
corrosion.
2. Coil the input and output cords
neatly when storing the charger.
This will help prevent accidental
damage to the cords and charger.
12