Diehl Hydrus Посібник з встановлення та експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з встановлення та експлуатації для Вимірювальні прилади Diehl Hydrus. Diehl Hydrus 20 сторінок. Ultrasonic water meter

Друкувати сторінку

HYDRUS

Finishing tasks

Slowly open the shutoff valves upstream and downstream of the

HYDRUS.

Check for possible leaks at the connections.

The HYDRUS must always be completely filled with water.

Failure to use provided fiber gaskets or equivelant may result in

connection leaks and damage to the HYDRUS.

6.2 Non-return valve

If desired, the HYDRUS can be delivered with a non-return valve (accessory).

This valve must be installed in the discharge of the HYDRUS.

" x

'';

1" (see Fig. II, page 2) NSF certified

Communication

The HYDRUS has different communication interfaces:

Optical

Encoder

7.1 Optical interface

The HYDRUS can be configured by using the integrated optical interface.

IZAR@MOBILE2 software is used to read data and set parameters. This

software can be found at https://www2.diehl.com/metering/en/diehl-

metering/support-center/downloads.

If an error occurs during configuration, configuration must be started

again using the optical interface.

For correct configuration, place the opto head on the optical interface of

the HYDRUS.

We recommend the Bluetooth Opto Head IZAR OH BT for configuration.

-8-

" S;

" L (see Fig. I, page 2) NSF certified

English