Axis Car Audio AX1501 Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Автомобільний приймач Axis Car Audio AX1501. Axis Car Audio AX1501 14 сторінок. Am/fm cd multimedia player
Друкувати сторінку
General Operation
Power On/Off Button
Press the
/MUTE button to turn
when the vehicle ignition switch is
Adjust Volume level
Rotate the VOL control to adjust volume
level. Rotate clockwise to increase and
anticlockwise to decrease the volume.
Audio Mute
Press the
/MUTE button to mute the volume
from the system. "MUTE" will appear on the
display and the volume will be muted.
Press the
/MUTE button again to return
the volume level to the setting in use before
the Mute function was activated.
Audio Controls
To adjust the balance and fader, press
the VOL control until the appropriate audio
control appears
on
the
display
Within five seconds, rotate the VOL control
to adjust the audio settings for the selected
function.
Mode Button (SRC)
Press the SRC button to change between
Radio, DISC (when disc is in), USB (when
USB is connected), Card (when SD/MMC card
is
or AUX play, etc.
the unit
Auxiliary Input
.
To access an auxiliary device:
1.
Connect the portable audio player to the
AUX interface on the front panel.
2.
Press the SRC button to select Aux-In
mode.
Press SRC again to cancel Aux-In mode and
go to the next mode.
The front AUX IN and rear AUX IN can
use
Setting the Clock
The correct time of day can be set by pressing
and holding the DISP button.
To set the clock:
1.
Turn the vehicle ignition and radio on.
2.
Press the DISP button to view the clock.
3.
With the clock visible on the display,
press and hold the DISP button until the
time display ashes.
panel.
4.
Within 5 seconds, rotate the VOL control
counter clockwise to adjust the minutes
to the desired setting. To change the
hour, rotate the VOL control clockwise to
adjust the hour to the desired time.
SOUND SETTING
effect mode. Rotate the knob to change
BEAT EQ in this order:
DSP OFF -> POP -> CLASSIC -> ROCK ->
JAZZ
Press the [ VOL ] button, to select USER
preset including:
BALANCE -> FADER , rotate the knob to
select a value.
BALANCE:LEFT 1-7->CENTR ->RIGHT 1-7
be
FADER:FRONT 1-7->CENTR ->REAR 1-7
3
the [ VOL ] button to enter sound