Olympus EVOLT E-300 Базовий посібник - Сторінка 17

Переглянути онлайн або завантажити pdf Базовий посібник для Цифрова камера Olympus EVOLT E-300. Olympus EVOLT E-300 34 сторінки. Evolt e-300 manuel de base (français)
Також для Olympus EVOLT E-300: Посібник із швидкого старту (2 сторінок), Брошура та технічні характеристики (10 сторінок), Технічні характеристики (3 сторінок), Короткий посібник (5 сторінок), Базовий посібник (іспанською) (34 сторінок), (Французька) Мануель Де Бас (34 сторінок)

Attaching a lens to the camera

Select the lens that you want to shoot with.

Use a specified Four Thirds lens (Four Thirds mount*). When a non-specified lens

is used, AF (auto focus) and light metering will not function correctly. In some

cases, other functions may not work either.

*Four Thirds mount:

Standard developed by Olympus. Lens mount of Four Thirds system. Developed

from the ground up, these all-new interchangeable lenses are based on optic

engineering exclusively for digital cameras.

Four Thirds system interchangeable lens

Designed to withstand severe professional use. The Four Thirds system makes it

possible for a fast lens to be compact and lightweight as well.

The Four Thirds system interchangeable lens lineup includes the following

products:

ZUIKO DIGITAL 14mm-54mm f2.8-3.5:

Standard zoom lens equivalent to 28-108 mm on a 35 mm lens

ZUIKO DIGITAL ED 50mm-200mm f2.8-3.5:

Super telephoto zoom lens equivalent to 100-400 mm on a 35 mm lens

ZUIKO DIGITAL ED 40mm-150mm f3.5-4.5:

Telephoto zoom lens equivalent to 80-300 mm on a 35 mm lens

When you attach or remove the body cap and lens from the camera, keep

the lens mount on the camera pointed downward. This helps prevent dust

and other foreign matter from getting inside the camera.

Do not remove the body cap or attach the lens in dusty places.

Do not point the lens attached to the camera toward the sun. This may

cause the camera to malfunction or even ignite due to the magnifying effect

of sunlight focusing through the lens.

Be careful not to lose the body cap and rear cap.

Attach the body cap to the camera to prevent dust from getting inside when

no lens is attached.

Note