AXITEC AXIhycon 10H Посібник із швидкого старту - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Інвертор AXITEC AXIhycon 10H. AXITEC AXIhycon 10H 8 сторінок.

CONNECTING AN ENERGY MANAGEMENT SYSTEM (EMS) [OPTIONAL]

CAUTION:

Ensure that the AC cable is completely disconnected from the power source

before connecting the smart meter, EMS, and CT clamps.

NOTE:

The pin configuration of the RS485 port follows

the EIA/TIA 568B standard.

RS485A is connected to pin 5 with blue/white.

RS485B is connected to pin 4 with blue.

CONNECTION OF THE POWER STORAGE SYSTEM

Use the supplied CAN cable to connect one end to the CAN port of the battery and the other end to the BMS

port of the inverter.

NOTE:

The pin configuration of the BMS and CAN ports ad-

heres to the EIA/TIA 568B standard.

CAN-H is on pin 4 (blue)

CAN-L is on pin 5 (blue/white).

CONNECTING THE DC CONNECTIONS

Check the polarity of the photovoltaic (PV) and battery strings.

Measure the AC voltage and frequency.

Connect the photovoltaic and battery power cables to the inverter.

INSTALLATION OF THE INVERTER (OFFLINE)

AXIhycon-EN231024

RS485A

RS485B

CAN-L

CAN-H