AccuLine 40-6543 Інструкція з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Лазерний рівень AccuLine 40-6543. AccuLine 40-6543 18 сторінок. Self-leveling rotary laser level with greenbrite technology

Друкувати сторінку

AccuLine 40-6543 Інструкція з експлуатації

1621H-English

X-Direction Accuracy Calibration

1. Turn the lock knob to the "OFF' position.

2. Remove the rubber plug from the X-direction self-calibration

aperture inside the battery compartment. Adjust the weight

screw inside the instrument core

with a flathead screwdriver.

3. If point A is above point O, rotate

the screwdriver counterclock-

wise. If point A is under the point

O, rotate the screwdriver clock-

wise. (Rotating the screwdriver 1

rotation will adjust the laser line 1mm).

4. Check the accuracy again following the X direction accuracy

self-check. If the accuracy is still beyond specification, read-

just the weight screw again until the accuracy is correct.

Y-Direction Accuracy Self-Check

1. Rotate the instrument 90 degrees and place it on the platform.

2. Check the accuracy of Y-direction with the same method as

that of X-direction (mark the point as C and D).

3. If the accuracy is beyond specification the unit can be

calibrated as follows.

9/4/08

9:05 AM

Page 12

X-direction Self-

calibration aperture