Olympus DW 90 - Digital Voice Recorder Інструкція з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Диктофон Olympus DW 90 - Digital Voice Recorder. Olympus DW 90 - Digital Voice Recorder 9 сторінок. Olympus microcassette recorder user manual
Також для Olympus DW 90 - Digital Voice Recorder: Інструкція (2 сторінок)
Друкувати сторінку
To Pause Recording
To pause
Press the REC button during recording. , "PAUSE" on the display and the
To resume recording
Press the REC button again. , Recording will resume at the point of interruption.
Note
The recorder will enter Stop mode if it has been left paused for 10 minutes or longer.
To check the remaining recording time
Press the DISPLAY button while the recorder is stopped.
To check the total number of files recorded in
the folder
Press and hold the STOP button while the recorder is
stopped. The total number of files recorded in the folder
appears on the display.
* In the case of folder S, the number of the date subfolder is
not included.
Playing Back
1
Press the MENU/FOLDER button to select the desired folder (A, B, or S).
2
Press the 9/+ or 0/– button to select the file to play back.
If you select folder S, select the desired date subfolder.*
* When you select the desired date subfolder, it is useful to press and hold the 9/+ or
0/– button for 1 second or longer. The recorder locates the next date subfolder that
contains recorded files.
3
Press the PLAY button to start playback.
The playing time** appears on the display.
** Each time you press the DISPLAY button during playback, the
display changes as follows:
Playing time
Remaining playing time
the file
Recording time of the file
4
Use the VOLUME control to adjust the volume to
your liking.
Note
When you play back a file in the date subfolder without choosing
a specified file, the recorder will play back all the files in the
selected date subfolder from filename "001." When you play
back a file immediately after recording the file, only the most
recently recorded file will be played back.
Canceling Playback
To stop
Press the STOP button. , The recorder returns to the beginning of the file being
played.
To pause
Press the PLAY button. ,"PAUSE" flashes on the display.
To resume playback
Press the PLAY button again. ,Playback will resume at the point of interruption.
Note
The recorder will enter Stop mode if it has been left paused for 10 minutes or longer.
Playback Functions
Operation
Fast Playback
Press and hold the PLAY
(F-PLAY)
button for 1 second or
longer while playing a
file.
Press and hold the 9
Fast Forward
(8)
button while playing a
file.
Press and hold the 0
Rewind (7)
button while playing a
file.
• Fast playback is approximately 30% faster than normal playback.
• When fast playback of a file is over, the recorder will play back the next file at
normal speed. If you once press the STOP button and start playback again, the
recorder will play back files in normal speed as well.
• No sound is heard from the built-in speaker during fast forwarding or rewinding.
• The end of the file is located by pressing and holding the 9 button during fast
forwarding. The recorder will pause at the end of the file. If you do not release the
9 button, the recorder will continue fast forward.
• The beginning of the file is located by pressing and holding the 0 button during
rewinding. The recorder will pause at the beginning of the file. If you do not release
the 0 button, the recorder will continue rewinding.
recording lamp will flash.
a Current folder
b Total number of
files recorded in
the current folder*
c Remaining
recording time
Recording date of
a Current folder
Playing time . . .
b Current file number
c Playing time**
MIN
MAX
How to cancel
If you press and hold the PLAY
button for 1 second or longer
again, the recorder will resume
normal playback.
When you release the 9 button,
the recorder will resume normal
playback.
When you release the 0 button,
the recorder will resume normal
playback.
Locating the beginning of the file
Press the 9/+ or 0/– button in Stop mode,* playback, fast playback, or
playback pause.
Each time you press the 9/+ or 0/– button, the recorder will locate the beginning
of the next or previous file.
* When folder S is selected, you cannot locate the beginning of the file in Stop mode.
Notes
• Even if you press the 9/+ or 0/– button during playback or fast playback, the recorder
will continue playback in the same playback mode.
• When you select folder A or B, you can locate the beginning of each file continuously by
pressing and holding the 9/+ or 0/– button while in Stop mode. During operation, "SKIP"
flashes on the display.
Erasing from Folder A or B
Erasing One File at a Time
1
Press the MENU/FOLDER button to select folder A or B.
2
Press the 9/+ or 0/– button to select the file to be erased.
3
Press the ERASE button.
The file number flashes, then alternatively "ERASE" and
"YES" appear on the display for 8 seconds.
4
Press the ERASE button again.
The file is erased.
Sequential file numbers are reassigned automatically.
Notes
• You can erase a file while in playback or playback pause.
• If you leave the recorder untouched for 8 seconds or longer before you press the ERASE
button in step 4, Erase mode will be canceled, and the recorder will enter Stop mode.
Erase All Files from a Folder
1
Press the MENU/FOLDER button to select the folder from which you
want to erase all files.
2
Press and hold the ERASE button for 2 seconds or
longer.
The folder name and "ALL" flash, then alternatively
"ERASE" and "YES" appear on the display for 8 seconds.
3
Press the ERASE button again.
All files in the selected folder are erased simultaneously.
Note
If you leave the recorder untouched for 8 seconds or longer before you press the ERASE button
in step 3, Erase mode will be canceled, and the recorder will enter Stop mode.
Erasing from Folder S
Erasing One File at a Time in a Date Subfolder
1
Press the MENU/FOLDER button and select folder S.
2
Press the 9/+ or 0/– button to select the date subfolder.
3
Press the PLAY button.
The recorder starts to playback all the files in the selected date subfolder.
4
During playback, press the 9/+ or 0/– button to select the file to be
erased.
5
Press the STOP button.
6
Press the ERASE button.
The file number flashes, then alternatively "ERASE" and
"YES" appear on the display for 8 seconds.
7
Press the ERASE button again.
The file is erased.
Sequential file numbers are reassigned automatically.
Note
If you leave the recorder untouched for 8 seconds or longer before you press the ERASE button
in step 7, Erase mode will be canceled, and the recorder will enter Stop mode.