Olympus LS-12 Базовий посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Базовий посібник для Диктофон Olympus LS-12. Olympus LS-12 25 сторінок. Linear pcm recorder
Також для Olympus LS-12: Технічні характеристики (2 сторінок)

Друкувати сторінку

Turning on/off the power (Fig. 2)

Turning on the power:

While the recorder is turned off,

slide the POWER/HOLD switch in the

direction of the arrow.

Turning off the power:

Slide the POWER/HOLD switch in the

direction of the arrow, and hold it for

1 second or longer.

Power save mode:

If the recorder is on but is not used

for 10 minutes or longer (default),

the display shuts off and the recorder

goes into power save mode.

• To exit power save mode, press any

button.

Setting the time and date

[ Time & Date ] (Fig. 3)

When you use the recorder for the

first time, or when the battery is

inserted after the recorder has not

been used for a long time, [ Set time

& date ] will appear. When " Hour " is

flashing, conduct setup from Step 6.

1 While the recorder is in stop mode,

press the MENU button.

2 Press the + , − , 9 or 0

button to select [ Device Menu ].

3 Press the OK button.

4 Press the + or − button to select

[ Time & Date ].

5 Press the OK button.

• " Hour " flashes on the display,

indicating the start of the Time

and Date setup process.

6 Press the 9 or 0 button to

select the item you want to set.

7 Press the + or − button to change

the value.

• Follow the same steps by

pressing the 9 or 0 button

to select the next item, and

pressing the + or − button to

change the value.

• You can select between 12 and

24 hour display by pressing the

F2 button while setting the hour

and minute.

• You can select the order of

" Month ", " Day " and " Year " by

pressing the F2 button while

setting these items.

8 Press the OK button to complete the

setting.

9 Press the F3 ( EXIT ) button to close

the menu screen.

Inserting an SD card (Fig. 4)

1 While the recorder is in stop mode,

open the card cover.

2 With the SD card facing the correct

way, insert it into the card slot as

shown in the diagram.

a Terminal surface

• Insert the SD card, keeping it

straight.

• Inserting the SD card in the

wrong way or at an angle could

damage the contact area or cause

the SD card to jam.

• If the SD card is not inserted

all the way, data may not be

recorded on the SD card.

• When you insert the SD card, the

recording media changeover

screen will appear.

3 Close the card cover securely.

4 To record on an SD card, press the +

or − button and select [ Yes ].

5 Press the OK button to complete the

setting.

[ Home ] screen operations

When you turn on the recorder, the

[ Home ] screen will be displayed. The

[ Home ] screen is the main screen

used for accessing each function.

In addition, you can also verify the

current settings for recording and

playback.

Switching functions (Fig. 5):

a [QUICK], [SMART] mode

Recording starts

• In [ SMART ] mode, recording

starts automatically when the

countdown by the automatic

adjustment function ends.

b [MANUAL] mode

Recording pauses

• Press the REC ( s ) button to start

recording.

c File list screen

• Press the PLAY ( ` ) button to

start playback.

Verifying the current settings (Fig. 6):

Press and hold the F3 ( INFO ) button

on the [ Home ] screen. You can also

check it while recording is paused.

The following settings will be

displayed.

1 [ Mic Gain ]

2 [ Rec Format ]

3 [ Mic Select ] *

4 [ Play Mode ]

5 [ Limiter ]

6 [ Low Cut Filter ]

7 [ Pre-Recording ]

8 [ Memory Select ]

* LS-14 only