Olympus BH-P Інструкція з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Olympus BH-P. Olympus BH-P 21 сторінка. Polarizing

lnterpupillary Distance and Diopter Adjustments

1 ) Insert the eyepiece v ~ i t h cross hairs of your choice into

tile right eyepiece tube, align~ng the positioning slot

and position~ng pi11

(Fig. 1 )

When the eyepiece positioning pin is inserted into the

lower slot on the tube, the cross lines in the eyepiece

coincide with the vibration direction of polarizer and

analyzer at 0 settings. When inserted into the other

slot, the cross lines are at 45O to the direction of

vibration.

Looking through the iight eyepiece (with cross hairs)

with your right eye, rotate the d ~ o p t e r adjustment ring

until the cross hairs are sharpty focused. (Fig.

3) Looking through the both eyepieces with both eyes,

adjust the interpupillary distance, sliding the knurled

dovetail slides

of the right and left eyepiece tubes,

cintil perfect binocular vis~on is obtained.

Fig. 2

4) Memorize your interpupillary distance setting by means of the scale

))!{

Rotate the tube length adjustment ring

on the right eyepiece tube to match your

interpupillary distance setting which you obtained from the scale

Look at the image through the right eyepiece with your right eyepiece v ~ i t h your right

eye and focc~s on the specimen with the coarse and fine adjustment knobs.

7) Look at the image through the left eyepiece w i t h yocrr left eye and rotate the tube length

adjustment ring @ ) to focus on the specimen without using the coarse and fine adjust-

ment knobs.

3. Light Path Selection

The trinoc~.llar tcrbe is provided w i t h a light path selector knob t o direct the light to the

observation tube or to the phototube.

Knob position

Pushed in all the way.

Pulled out all the way.

Amount o f light

100% into binocc~lar tub:!

20%

into binocular tube

80%

into phototube

Application

Observation

Photomicrography