Olympus BXFM-ILH Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Olympus BXFM-ILH. Olympus BXFM-ILH 36 сторінок. Focusing unit

REFLECTED LIGHT BRIGHTFIELD OBSERVATION

PROCEDURE

}The following flow chart pertains only to the reflected light brightfield observation which is the most basic operation. The

procedures for the polarized light and Nomarski DIC operations will be described in their respective sections.

Set the main switch to " I " (ON).

Select the light path (only when a trinocular

tube is used).

Place the specimen on the stage plate.

Engage the 10X objective in the light path.

Bring the specimen in focus.

Engage the desired objective in the light path

and bring the specimen in focus.

Start observation.

Disengage the analyzer, polarizer,

filter, etc. from the light path.

Adjust the brightness.

Adjust the interpupillary distance.

Adjust the diopter.

Insert the required filters.

Adjust the brightness.

(Controls Used)

@Main switch

²Lamp ON-OFF switch

³Brightness control knob

Light path selector knob

|Specimen holder

ƒRevolving nosepiece

...Coarse/fine adjustment knobs

³Brightness control knob

†Binocular tube

‡Diopter adjustment ring

ƒRevolving nosepiece

...Coarse/fine adjustment knobs

ŠFilter insertion slot

³Brightness control knob

(Page)

(P. 9)

(P. 12)

(P. 9)

(P. 10)

(P. 9)

(P. 11)

(P. 10)

(P. 13)

(P. 9)