Olympus CKX41 Посібник з ремонту - Сторінка 21

Переглянути онлайн або завантажити pdf Посібник з ремонту для Мікроскоп Olympus CKX41. Olympus CKX41 43 сторінки. Reflected fluorescence system
Також для Olympus CKX41: Огляд (7 сторінок), Брошура та технічні характеристики (4 сторінок), Інструкція з експлуатації (36 сторінок)

Друкувати сторінку

CKX31/CKX41

No.

Parts name

(A)

PLATE

(B)

PLATE

(C)

FINE ADJ. KNOB

(D)

ASS'Y

COARSE ADJ. KNOB

(E)

(F)

SPRING WASHER

(G)

WASHER

(H)

FINE SHAFT

MOUNT

(I)

WASHER

(J)

COARSE FOCUS

ADJ. KNOB ASS'Y

(K)

COVER

(L)

COVER

(M)

FOCUSING GUIDE

(N)

KNOB

(O)

BOTTOM PLATE

(P)

PINION SECTION

C. DISASSEMBLY AND ASSEMBLY PROCEDURES

Screw

ABS3X8SA, 2pcs. (*1)

CWK3X6SA, 3pcs. (*2)

ACU3X4SA, 2pcs. (*3)

CWK2.6X6SA, 3pcs. (*4)

CSK2.6X6SA, 2pcs. (*5)

CUK2.6X5SA, 1pc. (*6)

CUKK3X6SA, 1pc. (*7)

AB4X14SA, 3pcs. (*8)

ACU3X10SA, 1pc. (*9)

CTK3X6SA, 4pcs. (*10)

CUKS3X8SA, 4pcs. (*11)

ACU3X6SA, 2pcs. (*12)

C-10

Grease Adhesive

Rotating tension:

Standard: 0.3N -1.2N(OT3225)

OT2008

OT1378

Apply grease to the circumference

of the shaft(a).

Rotating tension:

Standard: 6N -25N(OT3223)

OT2008

Apply grease to the outer surface.

OT2008

Apply grease to the outer surface.

Apply grease to the shaft hole.

OT2008

Apply grease to the outer surface.

OT2008

While holding the coarse adj.

OT2012

knob ass'y , screw the fine shaft

mount into it.

Check that the gears moves

smoothly.

Attach it with double coated

adhesive tape.

Fit the protrusions into the holes

of frame.

Push it in the arrow directions

when assembling it.

(Refer to C-9.)

Also remove the four screws(*10)

of cover.

(Refer to the figure on C-9.)

The screw on the right back is

with HWB3SA.

For screw positions, refer to C-13.

When removing the Pinion

OT2006

OT1026

section, it is necessary to remove

OT2012

OT3111

the foucusing guide unit(M)

and bottom plate(O).

Fixing screw: ACU3X6SA(*12)

Remark