Olympus DP26 Інструкція з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Olympus DP26. Olympus DP26 36 сторінок. Microscope digital camera
Також для Olympus DP26: Інструкція з експлуатації (36 сторінок)

Друкувати сторінку

Maintenance and Storage

1. To clean the lenses and other glass components, simply blow dirt away using a commercially available

blower and wipe gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it with gauze slightly moistened with

commercially available absolute alcohol.

• Since the absolute alcohol is highly flammable, it must be handled carefully. To prevent fire

ignition, be sure to keep it away from open flames or potential sources of electric sparks -- for

example, electrical equipment that is being switched on or off.

• Also remember to always use these chemicals only in a well-ventilated room.

2. Parts other than the glass components should be cleaned by wiping with a clean cloth. Do not use

organic solvents to remove major stains. Use a soft cloth slightly moistened with a neutral detergent

solution.

3. When the system is not used, store it with the dust cover. Before storage, ensure that the main switches

of the camera head and the microscope are set to OFF and that the camera head, AC adaptor and

lamp housing is cool enough.

4. Do not disassemble any part of the camera as this could result in malfunction or reduced performance.

5. As this camera is easy to roll over, when you store it after removing it from the microscope, keep the C

Mount area down.

6. When smoking the room for cleaning, etc., move the DP26 to a place not exposed to smoke.

7. Care is required against condensation as this may sometimes cause malfunction. Condensation is the

phenomenon in which the vapor in the air is condensed into water drops, which attach to the surface of

a metallic plate, etc. It often occurs when the ambient temperature changes suddenly, for example when

a camera is brought from cold outdoors into warm indoors.