Olympus Pom Інструкція з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Olympus Pom. Olympus Pom 15 сторінок.

)

BODY

Circular Rotating Stage:

Outer diameter-140mm; the stage plate outer diameter-60mm. the

inner diameter-15mm; smooth rotation by means of ball-bearings; with

360

scale and J/20° verniers; may be cL!mped at any position; 4 holes

for clip fixing. 3 holes for mechanical stage setting, 2 holes for univer-

sal stage setting; a ring provided at the bottom of the stage for the

connecting rod for the analyzer and the polarizer.

Mechanica I Stage !cross-movement);

The mechanical stage

attached to the rotating stage.

Then a

slide glass is set onto it and the portion of the specimen to be examin-

ed is aligned with the center of

the rotating stage.

The maximum

range of movement. in four directions-back & forth and left & right.

is 30mm each and readings may be obtained as small as O.lmm on

verniers:

In such a case as the observation of ores by the vertical

illumination, first fix the specimen on tbe slide glass by rubber. etc.,

and set tbe glass onto the mechanical stage.

The bandpress for the

metallurgical microscope can be used to prepare a specimen.