Olympus SZX10 Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Olympus SZX10. Olympus SZX10 40 сторінок. Research high-class stereo microscope
Також для Olympus SZX10: Огляд (24 сторінок), Інструкція з експлуатації (36 сторінок)

Друкувати сторінку

Important

Safety Precautions

Downloaded from

ManualsNet.com

search engine

1. After the equipment has been used in an observation of a

specimen that is accompanied with a potential of infection, clean

the parts coming in contact with the specimen to prevent infection.

· Moving this microscope is accompanied with the risk of

dropping the specimen and causing infections. Be sure to

remove the specimen before moving this product.

· In case the specimen is damaged by erroneous operation,

promptly take the infection prevention measures.

· The microscope may become unstable when certain

intermediate attachments and/or photography unit are

mounted on it. Take the measures so that the microscope does

not turn over.

2. To prevent the microscope body from turning over, its left-right pivot

angle must be limited to 30° as shown in figure. The tilt of the

desktop surface should be no more than 5°.

3. Sufficient care is required during observation with a low-

magnification objective, because the objective's long WD (Working

Distance) can displace the microscope body to a higher position.

The measures for prevention of turning over are also required when

using an auxiliary pillar (SZH-P400/P600), because this also makes

the microscope body to be displaced to a higher position.

4. To adjust the microscope body height, be sure to hold the

microscope body with one hand while loosening the focusing

assembly clamping knob a .

(Use the drop prevention collar (SZX-R) to prevent a hazard from

occurring.)

Be careful not to pinch your finger during the adjustment.

SZX10