Olympus U-HSEXP Інструкція з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Olympus U-HSEXP. Olympus U-HSEXP 16 сторінок. Coded function system
Також для Olympus U-HSEXP: Інструкція з експлуатації (16 сторінок)
Друкувати сторінку
2
SYSTEM CHART
· Entrust the assembly and adjustments of the modules marked* to Olympus.
CAUTION
The connectors of the U-CBS are sealed with dust covers. Remove the dust covers only from the connectors
you want to connect cables.
· Be sure to connect the module designated by Olympus to each connector. If a non-designated module is
connected, the performance of the entire system cannot be guaranteed.
· Before connecting the cables, make sure that the POWER switch of the U-CBS control box is set to OFF (out
position).
Hold each connector in the appropriate orientation and insert it all the way into the connector. If a connector
is provided with clamping screws, be sure to tighten them.
· Do not insert a non-designated connector. Otherwise, the connector may be damaged.
Coded Fluorescence
Illuminator *
BX3-RFAS
Microscope Frame
BX43F
BX53F
Control Box for Coded Units
U-CBS
U-D7RES connector
BX3-RFAS connector *
RS-232C cable
Option connector
U-HSEXP connector
Note 3)
CODED FUNCTION SYSTEM
Note 2)
Note 2)
Note 4)
Microscope
Digital Camera
DP21
Note 1)
AC adapter
4