Olympus SHV-1 Інструкція з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари для фотоапаратів Olympus SHV-1. Olympus SHV-1 11 сторінок. Flash high voltage set

Друкувати сторінку

Remaining battery capacity indication

The power remaining in the BN-1 Ni-MH Battery Pack can be confirmed by pressing its power

indicator button.

Lamp Status

Blinking

Note

• The remaining battery capacity indication shows merely a reference. The lamp status is subject to change due to

various conditions.

Charge time and flashing count

The following table shows the battery charge time and the number of flash operations available

when different batteries are used on the FL-50 Electronic Flash.

Battery used in FL-50

None

AA/R6 alkaline battery (LR6)

AA/R6 lithium battery (LR6)

AA/R6 Ni-Mn battery (ZR6)

CR-V3 (Olympus LB-01) lithium battery pack

AA/R6 Ni-Cd battery (1000 mAh)

AA/R6 Ni-Mh battery (1900 mAh)

Notes

• Up to 10 successive full flashes are permitted. After 10 flashes, the flash should not be used for more than 10 minutes

to allow the light-emitting surface to be left cooled.

• Charging times and flash count data were obtained from Olympus in-house testing.

Battery Condition

Fully charged

Remaining power is low. Charge the

battery pack soon.

0%: Charge being requested

Flash interval

Approx. 1.2 sec.

Approx. 1 sec.

Flash count

Approx. 280 times

Approx. 400 times

Approx. 370 times

Approx. 450 times