Axkid Rekid Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Дитячі та ясельні меблі Axkid Rekid. Axkid Rekid 16 сторінок.

If you have installed Rekid in the back seat

you can now move the front seat to a com-

fortable position. The back of the child re-

straint can, but is not necessary, be in con-

tact with the back of the front seat.

Adjusting the internal harness

Place your child in the car seat. Put your

child's arms in between the shoulder straps

so that the straps are hanging over the chest

and stomach. Pull the shoulder straps to-

gether and insert the harness tongues into

the crotch buckle. Push the harness up over

the childs hip. Pull the harness adjustment

strap (13). It´s important that you always

pull the harness straight and central. Other-

wise you might have a that the adjustment

strap gets stuck in the metall-lever(13).

This action will tighten the harness and

the headrest will automatically slide down

to the appropriate height. To release the

harness, press the harness adjustment but-

ton and pull both harness straps. Press the

red button on crotch buckle to disengage

buckle.

The headrest on your Rekid is

equipped with a parking brake. This

could be used if you want the headrest in a

fix position. To activate the parkingbrake,

pull the harness until the headrest is at

the desired height, you will hear a "click"

sound from the headrest as it locks into

position. Make sure that the headrest can

not be pulled down. Activate the brake

by moving the lever (14) on the headrest

across to the right. Do not pull up the

headrest with the parking brake activated.